» Home
» Electrical Wiring Directory
» Electrical Repairs
» Wiring Outlets
» Residential Electrical Wiring: Guide to Home Wiring
» Need Electrical Help? Get a Quick Reply! Ask the Electrician
» Residential Electrical Wiring: Guide to Home Wiring
» Need Electrical Help? Get a Quick Reply! Ask the Electrician
|
Install and Repair Electrical Outlets |
220 Volt Outlet ProblemElectrical Outlets Question I'm having a problem with wiring a 220 volt Leviton Model 5823 NEMA 6-20R receptacle outlet.GFCI Outlet InstallationElectrical Outlets Question Is a GFI outlet installed at the start of a run or at the end of the run? Thanks, Mike.Hi Michael - Great Electrical Repair Question! The best place to install a GFCI outlet or receptacle is at the beginning of the circuit, wiring it so the load to the rest of the circuit is wired through the GFCI and the remaining receptacles or devices are then protected by the GFCI.How Many Electrical Outlets On A CircuitElectrical Outlets Question How many electrical outlets can be on one circuit? Thanks- N.Hi N. - Great Electrical Repair Question! It really depends on where the electrical outlets will be located, what wire size you will be using and what the receptacles will be used for.Kitchen Island Outlet WiringElectrical Outlets Question I need to install a receptacle in a new kitchen island and I only have 1 inch clearance from the drawers to the inside of the wall.Kitchen Outlet Not WorkingElectrical Outlet Question I recently replaced an outlet in my kitchen. It was a 20amp outlet and I connected it appropriately, using the back holes instead of screws to attach the wires.Kitchen Outlets Not WorkingElectrical Outlets Question Our kitchen has 4 outlets each 2nd outlet has stopped working. I've checked for power with a voltage tester.Lost Power to Room OutletsElectrical Outlets Question Have half power to on wall and one wall has no power,have checked breakers and all good any advise?Microwave Outlet CordElectrical Outlets Question My microwave is mounted inside my kitchen wall. But the plug in about 2 1/2 feet away from the microwave.New Range Electrical OutletElectrical Outlet Question Electrical outlet for new range 220 line. I am renovating an old house, including a complete kitchen remodel.Switched OutletElectrical Outlets Question When wiring a half-hot outlet do I leave the tab on the neutral side connected? If not then do I need to run a neutral wire to both screws on that side?.Switched Outlet WiringElectrical Outlets Question I'M TRYING TO WIRE A SWITCHED OUTLET PROBLEM IS IN SWITCH BOX I HAVE 1 SET OF WIRES BLACK,WHITE, GROUND AND ANOTHER SET LIKE ABOVE PLUS RED, SAME SET UP IS IN OUTLET TRYING TO GET SWITCH TO WORK JUST TOP PLUG AND BOTTOM ALWAYS HOT.Switched Outlet Wiring DiagramElectrical Outlets Question I replaced a receptacle. The switch used to turn off half the receptacle and the other half would stay on now both top and bottom go off and on with the switch HELP!!!.Tight Screw Outlet ConnectionsElectrical Outlets Question I have replaced a good amount of receptacles in my home, and I'm the type of person that worries about every last thing possible and mainly about burning my house down. |
|
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical TesterThis is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet TesterThis is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring. It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire CutterMy absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires. This handy tool has multiple uses: The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation. The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets.. The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use. |
|