Why Does my Circuit Breaker Trip when I use the Microwave Oven?
The electrical load of the toaster and the microwave over exceed the amperage of the existing shared circuit.
Electrical Question from Robert about Tripping Circuit Breaker
Received from Robert a Homeowner in Sewell, New Jersey
Question: My microwave is positioned above my stove (Kenmore). My toaster is plugged into the outlet next to the stove. When I use both simultaneously my circuit breaker trips. Any ideas why this happens?
Thanks for your electrical question.
Hi Robert – The problem is that you do not have a dedicated circuit for the microwave oven. The electrical load of the toaster and the microwave over exceed the amperage of the existing shared circuit. The best solution is to have a dedicated circuit installed for the microwave oven. Never increase the size of the circuit breaker because this would create a potential fire hazard.
The Following links will assist you with your electrical question:
For more information about Other Electrical Issue
Home Electrical Wiring
This link is helpful as a Homeowner
Make sure not to miss these Resources for: Other
Home Electrical Wiring Resources
Be Careful and Be Safe – Never Work on Energized Circuits!
For Best Results Consult a Licensed Electrical Contractor.
Locate An Electrical Contractor in Your Area
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
|More articles about Circuit Breaker, Electrical and Home Electrical Wiring:|
|« Previous||Next »|
|Could there be a Problem with our Main Circuit Breaker?||Electrical Question from Jordan about Garage GFCI|