Articles about Electric Wiring

How to Wire a Dryer Outlet

I had a problem with my dryer outlet so I rewired it and now the dryer does not work, how can I fix my dryer? Electric Dryer Outlet Problems and How to Fix Them, Problems with Dryer Outlet Wiring, Dryer Circuit Wiring.

Rewiring for Bedroom and Living Room Outlet Circuits

How many outlets I can have on a circuit for a room? Circuit Planning for Room Outlet Circuits, How to Rewire Home Electrical Outlet Circuits.

Replace a Light Switch with a Motion Detector Switch

How can I replace a light switch with a motion detector switch? I am trying to replace what I thought was a basic switch in my garage that controls an overhead bulb.

Electric Well Pump Circuits

Can I power my shed with 120volt from the 240volt well circuit? Installing a 240volt 3wire Circuit for a Well Pump Panel, Dedicated Circuit for Well Pumps.

Adding Electrical Wiring in the Home Videos

How should I install electrical wiring inside the walls of my home? Installing Electrical Wiring around Obstacles inside the walls and ceilings.

How to Wire for GFCI Electrical

Is it better to have a GFCI Circuit Breaker or install a GFCI outlet? How to Install Wiring for Basement GFCI Outlets, Basement Electrical Wiring.

Electric Circuit for an Arc Welder

How do I connect the wiring for a 220Volt Arc Welder? How to Wire an Arc Welder with a Dedicated Circuit and the Wiring Requirements.

How To Install a Floor Outlet

How can I install an outlet into the floor? The Basics for Installing a Floor Outlet, Parts for Installing a Floor Outlet.

3Wire and 4Wire Kitchen Range and Stove Circuits Video

How can a stove be connect to a 3-wire outlet? 3Wire and 4Wire Range and Stove Circuits, Wiring 3 prong and 4 prong Range Cords.

Bathroom Remodeling and Electrical Wiring

How are lights and outlets wired when Remodeling a Bathroom? Installing Electrical Wiring for a Bathroom Remodel Project.

Electrical Problem with Two Circuits from the Same Phase

How to Identify and Solve Electrical Circuit Problems

The Key to Wiring Three Way Switches

My three way switches do not work right, how can I fix this? The key to wiring three way switches, Identifying the electric wiring.

Electrical Earth Grounding Methods

How should I install a ground for my electrical service panel? How to Install an Earth Ground System for a Home Electrical Panel.

Using Copper and Aluminum Wire for Home Circuits

When splicing aluminum and copper wires do the wire connectors need to be a special type? Wiring Methods for Copper and Aluminum Wires, Safe uses of Aluminum Wire for Larger Home Electrical Circuits.

How to Install Wiring in a Basement

Can the Romex brand wire be used when Wiring a Basement? Romex or metal cable: What should be used when wiring a basement and how is the wiring protected. NEC Code Article Sections 336-6c, 333-11

Incorrect Outlet Ground Wire Could be a Shock Hazard

Is it safe to wire the ground wire to the neutral side of the outlet? Why a Ground Wire Should Not be Used as a Neutral Wire on a Receptacle Outlet.

To Help You Wire it Right

The Safest Way to Test Electrical Devices and Identify Electric Wires!
The Non-Contact Electrical Tester

This is a testing tool that is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.

The Quickest Way to Check for Faulty Electrical Wiring!
The Plug-In Outlet Tester

This is great to troubleshoot a problem with outlet circuit wiring, is also used by most inspectors to test for power and check the polarity of circuit wiring.
It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect, Very handy and easy to use.

Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!
The Wire Stripper and Wire Cutter

A wire stripping tool used to safely strip electrical wires. This handy tool has multiple uses: The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation. The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets.

Recent Testimonials

I think your site offers the the clearest and best electrical information for homeowners I have ever seen on the net.You have given me confidence to do my own projects which I never had before. THANK YOU!
Paul, from Foxboro, Massachusetts

I wish I found this site earlier, it is by far the best electrical related resource I have found on the web.
George, from Scranton, Pennsylvania

I love this site for an office worker that does not know anything about electric wiring.
Bill, from New York City, New York

This site is so much better than the 3 books I just bought, I wish I came here first.
Collin, from Grand Rapids, Michigan

Thank you for answering my question.
I was able to get this done. This site is perfect. I am glad I found it. Please keep it going.
Mike, from Chicago, Illinois

Read more Comments

Leave a Comment

»How To Wire It RIGHT! «
Wire it with Confidence!
Fully Illustrated
Instant Download

Now You Can
Wire it like a Pro!

Residential Electrical Wiring

Learn Electrical Wiring
Instructional Electrical Wiring Videos

Home Electrical Wiring and Electrical Repairs

Please Note:
Unless otherwise posted, please refer to the following Guidelines when working on Electrical Projects:

Skill Level:
Intermediate to Advanced - Electrical Repairs and Circuit Wiring is Best Performed by a Certified Electrician or Licensed Electrical Contractor.

Electrical Tools Required:
Basic Electricians Pouch of Hand Tools, a Voltage Tester and a Multi Meter.

Estimated Time:
Depends on personal level experience, ability to work with tools, work with electrical wiring, and the available access to the project area.

Precaution:
Identify the project circuit, turn it OFF and Tag it with a Note before working with the wiring.

Important:
Modifying existing electrical circuits or installing additional electrical wiring should be done according to local and National Electrical Codes, with a permit and be inspected.