Articles about Wiring With Fixtures

How To Add A Ceiling Fan With Existing Light Fixtures

How to Wire a Ceiling Fan with Existing Light Fixtures. I want the fan to work just by a pull-chain but continue to have the switch operate the remaining can lights, how can I wire this?

Replacing Ceiling Light Fixtures with Ceiling Fans

How can I replace two ceiling light fixtures with two ceiling fans that also have a light kit? How to Wire Ceiling Fans and Wall Switches.

Replacing a Light Fixture with a Ceiling Fan

How to Replace a Light Fixture with a Ceiling Fan: Guide for Wiring a Ceiling Fan, Common Problems When Wiring a Ceiling Fan.

How To Connect Ceiling Fan Wires

Where do I connect the Red Wire for the Ceiling Fan? Ceiling Fan Installation and the Wiring Connections.

Factors to Consider For Home Made Light Fixtures

How to Build a DIY Light Fixture: Checklist for Planning a Light Fixture, Considerations for Light Fixture Safety.

Wiring Two Ceiling Fans and Switches

How to Wire Ceiling Fan Switches – Step-by-step pictures – Easy wiring diagrams and installation guide – Light and fan switch variations.

Switch Wiring Diagrams for Ceiling Fans

How to Wire Wall Switches for Ceiling Fans and Ceiling Fan Remote Controls

How To Switch A Ceiling Fan Light Apart From The Fan

Here are some Electrical Wiring Options for the Ceiling Fan Light Fixture that will allow you to control the Light Fixture separately from the Ceiling Fan Motor.

Ceiling Fan Pull Chain Light Switch Wiring

The lights quit working on the ceiling fan. There are 4 bulbs & a 3 way switch. I replaced the light switch. Still no light…

Older Home Ceiling Fan Replaces Existing Light Fixture

I put up a ceiling fan w/a light in a bedroom with just a light switch. A two bulb light fixture was up prior which only had a black and white wire.after putting up the fan the lights were dim and the fan appears to not be going at it’s correct speeds…

Electrical Tips to Help You Wire it Right

The Safest Way to Test Electrical Devices and Identify Electric Wires!
The Non-Contact Electrical Tester

This is a testing tool that is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.

The Quickest Way to Check for Faulty Electrical Wiring!
The Plug-In Outlet Tester

This is great to troubleshoot a problem with outlet circuit wiring, is also used by most inspectors to test for power and check the polarity of circuit wiring.
It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect, Very handy and easy to use.

Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!
The Wire Stripper and Wire Cutter

A wire stripping tool used to safely strip electrical wires. This handy tool has multiple uses: The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation. The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets.

Residential Electrical Wiring

Learn Electrical Wiring
Instructional Electrical Wiring Videos

Home Electrical Wiring and Electrical Repairs

Please Note:
Unless otherwise posted, please refer to the following Guidelines when working on Electrical Projects:

Skill Level:
Intermediate to Advanced - Electrical Repairs and Circuit Wiring is Best Performed by a Certified Electrician or Licensed Electrical Contractor.

Electrical Tools Required:
Basic Electricians Pouch of Hand Tools, a Voltage Tester and a Multi Meter.

Estimated Time:
Depends on personal level experience, ability to work with tools, work with electrical wiring, and the available access to the project area.

Precaution:
Identify the project circuit, turn it OFF and Tag it with a Note before working with the wiring.

Important:
Modifying existing electrical circuits or installing additional electrical wiring should be done according to local and National Electrical Codes, with a permit and be inspected.

»How To Wire It RIGHT! «
Wire it with Confidence!
Fully Illustrated
Instant Download

Now You Can
Wire it like a Pro!

Recent Testimonials

I think your site offers the the clearest and best electrical information for homeowners I have ever seen on the net.You have given me confidence to do my own projects which I never had before. THANK YOU!
Paul, from Foxboro, Massachusetts

I wish I found this site earlier, it is by far the best electrical related resource I have found on the web.
George, from Scranton, Pennsylvania

I love this site for an office worker that does not know anything about electric wiring.
Bill, from New York City, New York

This site is so much better than the 3 books I just bought, I wish I came here first.
Collin, from Grand Rapids, Michigan

Thank you for answering my question.
I was able to get this done. This site is perfect. I am glad I found it. Please keep it going.
Mike, from Chicago, Illinois

Read more Comments

Leave a Comment