What Size Light Bulb Is Safe For Fixtures?
Light Fixtures Light Sockets Lamps and Light Bulbs: Guide for Selecting the Right Size Light Bulb, CAUTION: Installing the Wrong Size Light Bulb Can be Dangerous!
The Wrong Size Light Bulb Can Be Dangerous!
Electrical Question #1: I am replacing Light Bulbs in Light Fixture Lamp Sockets.
- An over simple question to ask here, but places on the internet have incomplete or wrong answers.
- I have an existing light fixture with five “standard” base lamp sockets. Each socket says 660Watt 250Volt.
- I know what it means when a single sockets fixture says 60W/125V, but I’m unclear on what this means and in particular I need to know what the maximum watt bulb I can use in each socket is.
- Obviously it isn’t running at 250V, and it seems clear that whatever the 660W means it covers all the sockets not just one. Does it mean I could put up to a 132W bulb in each socket?
I feel fairly safe just putting a 60W bulb in each one, but we’d actually like more if possible.
- This is a chandelier kind of fixture, and the bulbs are the small globe-type bulbs, 14W CF bulbs put in by the previous owner – the light is inadequate and even after being on for a while, these flicker too much.
- I understand there are more expensive CF bulbs that are better, but this light gets turned off and on a lot, so I’m leaning towards going with incandescent. Thus the desire to know about maximum wattage.
Background: Ed, a Homeowner from Amherst, Massachusetts.
Electrical Question #2: I’m wondering if halogen bulbs are OK in our light fixture.
- I want to make sure I understand which light bulbs to safely use with a light fixture we recently installed in our kids? playroom. We installed this fixture: Portfolio 6-Light 69.6-in Brushed Steel Dimmable Fixed Track Light Kit. We are using 2 clear Halogen bulbs. And 4 indoor flood lights – halogen. We are using the recommended wattage, but I’m wondering if halogen bulbs are OK in this fixture and especially the indoor halogen flood lights – they fit inside just fine but it?s a tight fit.
- I want to make sure this is safe as the recommended bulb type is A19.Safe meaning – not a fire hazard and not going to explode…
If not safe, could you recommend best bulb to use? I do not use LED or CFLs due to heavy metal content.Thank you so much!!
This electrical wiring question came from Allie, a Homeowner in Charlotte, North Carolina.
Thanks for your home electrical question Ed and Allie.
Light Fixtures, Lamps, Light Sockets and Light Bulbs
Guide for Selecting the Right Size Light Bulb
- Light Socket Rating
- The printing on the socket is what the socket is rated for, and I would only trust that if the socket had a UL stamp on it.
- Light Fixture Specifications
- Just because the socket has its rating listed you still need to see what the light fixture manufacturer specifies for the type and highest watt size light bulb that is allowed.
- Light Bulb Size
- Installing the wrong size light bulbs can be dangerous because of the amount of heat that can be produced from the light bulb.
More about Light Bulbs and Light Fixtures
- An informative series about do-it-yourself lighting for the home that will reveal several options for improving your home lighting. This guide will help educate you about several options and styles available for your next home improvement project.
The following may also be helpful for you:
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical Tester
This is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet Tester
This is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring.
It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire Cutter
My absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires.
This handy tool has multiple uses:
The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation.
The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets..
The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use.
|More articles about Light Socket, Lighting and Home Electrical Wiring:|
|« Previous||Next »|
|Cause of No Power to a Home Electrical Circuit||Wire Connections for a 3-Wire Range Cord with Video|