Installing Home Electrical Wiring

Where do I attach the ground wire from the 4 wire cluster, on the neutral bar

Do You Need Electrical Help?

Guide to Residential Electrical Wiring

Electrical Wiring for the Home

Question: My brother is putting in his new house. I am aware of electricity and have been working with it since I was little. But for some reason, when I went to wire in his meter box, I am drawing a blank.He ran 4 wire from the box to his house in conduit. In his meter box there is of course two hot places to attach the load wires and the neutral bar. Where do I attach the ground wire from the 4 wire cluster, on the neutral bar and also where do I attach the grounding cable? I know I am thinking this out too much, hopefully you can help clear my mind, any diagrams would help if you could. Thanks!

This electrical question came from: James, a Handyman from New Concord, Ohio

See more about Home Wiring for Ohio

Dave’s Reply:
Thanks for your electrical question James

The Following links will assist you with your electrical question:

Electrical Wire for the Home

Guide to Home Electrical Wire

Electrical Wire for the Home

Complete listing of electrical wire types and parts used for home projects with electrical code information serves as selection guidelines.

Electrical Grounding

Electrical Grounding Methods and Requirements

Listing of electrical codes for grounding with examples of electrical grounding codes for home electrical wiring.

» You Can Avoid Costly Mistakes! «

Here's How to Do It:
Wire It Right with the help of my Illustrated Wiring Book
Great for any Home Wiring Project.

Complete Guide to Home Electrical Wiring

Perfect for Homeowners, Students,
Handyman, Handywomen, and Electricians
Includes:
Wiring GFCI Outlets
Wiring Home Electric Circuits
120 Volt and 240 Volt Outlet Circuits
Wiring Light Switches
Wiring 3-Wire and 4-Wire Electric Range
Wiring 3-Wire and 4-Wire Dryer Cord and Dryer Outlet
How to Troubleshoot and Repair Electrical Wiring
Wiring Methods for Upgrading Electrical Wiring
NEC Codes for Home Electrical Wiring
....and much more.

Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.

Electrical Tips to Help You Wire it Right
	The Safest Way to Test Electrical Devices and Identify Electric Wires! The Non-Contact Electrical Tester This is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
	The Quickest Way to Check for Faulty Electrical Wiring! The Plug-In Outlet Tester This is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring. It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
	Strip Off Wire Insulation without Nicking and Damaging the Electric Wire! The Wire Stripper and Wire Cutter My absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires. This handy tool has multiple uses: The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation. The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets.. The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use.

« Electrical Power for a Garage Panel

Wiring a Ceiling Fan Remote Control »

COMMENTS and QUICK QUESTIONS:

If you are asking a Quick Question please make sure it is about This TOPIC:
“Installing Home Electrical Wiring”

Comments Posted here are Open for Quality Discussion and Participation.
PLEASE NOTE: WE DO NOT PUBLISH 3RD PARTY SPAM COMMENTS, TRACK-BACKS OR LINKS.

Home Electrical Wiring and Electrical Repairs

Please Note:
Unless otherwise posted, please refer to the following Guidelines when working on Electrical Projects:

Skill Level:
Intermediate to Advanced - Electrical Repairs and Circuit Wiring is Best Performed by a Certified Electrician or Licensed Electrical Contractor.

Electrical Tools Required:
Basic Electricians Pouch of Hand Tools, a Voltage Tester and a Multi Meter.

Estimated Time:
Depends on personal level experience, ability to work with tools, work with electrical wiring, and the available access to the project area.

Precaution:
Identify the project circuit, turn it OFF and Tag it with a Note before working with the wiring.

Important:
Modifying existing electrical circuits or installing additional electrical wiring should be done according to local and National Electrical Codes, with a permit and be inspected.