Electrical Question From Analia About Dryer Wiring

I have an old panel box in my laundry room that uses two t-30 round screw in fuses. One of the fuses keeps burning out when I use the dryer.

Electrical Question about: Dryer Wiring

Received from Analia a Homeowner in San Antonio, TX

Question: I have an old panel box in my laundry room that uses two t-30 round screw in fuses. One of the fuses keeps burning out when I use the dryer. I have two electricians coming to see it this afternoon and don’t want to be taken advantage of.

Dave’s Reply:
Thanks for your electrical question.

The Following links will assist you with your electrical question:
For more information:
Home Electrical Wiring Resources

This link is helpful as a Homeowner
Do-It-Yourself Electrical

Make sure not to miss these Resources for: How-To-Videos
Electrical Videos

Be Careful and Be Safe – Never Work on Energized Circuits!

For Best Results Consult a Licensed Electrical Contractor.
Locate An Electrical Contractor in Your Area

» You Can Avoid Costly Mistakes! «

Here's How to Do It:
Wire It Right with the help of my Illustrated Wiring Book
Great for any Home Wiring Project.

Complete Guide to Home Electrical Wiring

Perfect for Homeowners, Students,
Handyman, Handywomen, and Electricians
Includes:
Wiring GFCI Outlets
Wiring Home Electric Circuits
120 Volt and 240 Volt Outlet Circuits
Wiring Light Switches
Wiring 3-Wire and 4-Wire Electric Range
Wiring 3-Wire and 4-Wire Dryer Cord and Dryer Outlet
How to Troubleshoot and Repair Electrical Wiring
Wiring Methods for Upgrading Electrical Wiring
NEC Codes for Home Electrical Wiring
....and much more.

Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.

More articles about Dryer Cords, Electrical and Home Electrical Wiring:
« Previous	Next »
Electrical Question From Francis About Dryer Wiring	Electrical Question From Jeffrey About Solar Lighting

You must be logged in to post a comment.

Home Electrical Wiring and Electrical Repairs

Please Note:
Unless otherwise posted, please refer to the following Guidelines when working on Electrical Projects:

Skill Level:
Intermediate to Advanced - Electrical Repairs and Circuit Wiring is Best Performed by a Certified Electrician or Licensed Electrical Contractor.

Electrical Tools Required:
Basic Electricians Pouch of Hand Tools, a Voltage Tester and a Multi Meter.

Estimated Time:
Depends on personal level experience, ability to work with tools, work with electrical wiring, and the available access to the project area.

Precaution:
Identify the project circuit, turn it OFF and Tag it with a Note before working with the wiring.

Important:
Modifying existing electrical circuits or installing additional electrical wiring should be done according to local and National Electrical Codes, with a permit and be inspected.