Why did my computer screen just turn green?
I had this same thing happen to me. What I finally discovered is that the cable from the monitor to the computer was…
Electrical Question from Dave about Other Electrical Issue
Background: Dave, an Electrician from California.
Question: Why did my computer screen just turn green?
Additional Comments: Great website!
Thanks for your electrical question Dave.
Replacing a Faulty Cable
I had this same thing happen to me. What I finally discovered is that the cable from the monitor to the computer was bad. As soon as I replaced it all the colors were back to normal. What a relief, because I thought that either my monitor was going bad or my video card was failing, neither was the case.
My original monitor cable was a bit short so this always made the cable to be stretched, and I’ll bet this is what caused one of the video wires to finally pull apart. I purchased a longer video cable, now it should not happen again.
The Following links will assist you with your electrical question:
For more information about Other Electrical Issue
Home Electrical Wiring
This link is helpful as a Electrician
Electrical Code Articles
Make sure not to miss these Resources for: More eBooks
Home Electrical eBooks
Be Careful and Be Safe – Never Work on Energized Circuits!
For Best Results Consult a Licensed Electrical Contractor.
Locate An Electrical Contractor in Your Area
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical Tester
This is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet Tester
This is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring.
It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire Cutter
My absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires.
This handy tool has multiple uses:
The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation.
The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets..
The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use.
|More articles about Troubleshooting and Home Electrical Wiring:|
|« Previous||Next »|
|Can different voltages exist in the same switch box?||Can I Change the Ground on my Electrical Outlet?|