Articles about Outdoor Lighting
Armando in New Jersey asks: We are going to install an outside light with conduit. Can We use MC cable (BX cable )inside the conduit?
Lisa in Ohio asks: I have a post light with a damaged UF cable. Can I install low voltage lighting to the undamaged end of the UF wire the post light?
Tags: change the wiring, damaged UF cable, front yard, led landscape light, led yard light, low volt, low voltage, low voltage light, low voltage lighting, pole light, post light, UF Cable, yard light
How to Wire an Outdoor GFCI Circuit for Outlets and Lighting: Install an outlet on a lamp post near the driveway: GFCI Wiring Connections for Outside Outlet and Lighting
How to Protect Outdoor Lighting Fixtures with a GFCI Outlet: I have installed a low voltage outdoor lighting system in my home. The instructions say to plug it into an outdoor GFCI socket, but I do not have one.
How do I fix an outdoor light that is not working right? How to Repair Outdoor Light Problems, Typical Light Fixture Problems to Look for.
How to Change the Settings for a Motion Detector Light: The Flood Light Time Duration Switch Settings.
How to Install Wiring for Outdoor Lighting: Planning Circuits and Switch Wiring for Outdoor Lighting.
How to Install and Troubleshoot Wiring For Outdoor Post Lights: Checking the Wiring, Connections to the GFI, Post Light Wiring.
Electrical Wiring and Fixture Checks for Post Lights: I have a post light that isn’t working. There is power coming through the post wires.
I have a paver patio with 3 foot columns and the patio has low voltage landscape lighting, the problem is I can’t find decent low voltage post type fixture…
Wire or cable type normally used here to feed such an outside light or if it would be ok in electrical plastic or metal conduit…
My outdoor flood light that is attached to the garage keep going off and on. It is on for about 10 minutes and off for about 20-30 minutes…
would be OK to use in-house wiring from the GFI to the light on the pole…
There are a variety of fixture boxes that can be used for just about any wiring situation. If the 2×6 is directly at the desired location for the light fixture then…