Articles about

Wiring Connections When Replacing an Oven

How do I connect the bare copper wire from the wall to the oven wires? How to Identify the Oven Wires when Replacing an Oven: Connecting the Electric Wires for an Oven.

Dangers of Warm Electrical Outlets and Aluminum Wiring

How to Fix Aluminum Wiring Problems: Making Aluminum Wiring Safe, How to Correct the Most Common Problems with Outlet Wiring.

Installing Floor Heat Electrical Wiring

How to Install a Floor Heat System: Laying out the Area for the Floor Heat System, Determine the Circuit Requirements, Thermostat Control and GFCI Protection, Installing the Floor Heat Cables or Heating Mat, Installing the Electrical Circuit.

Short Circuit Current Rating and Fault Level Current

The Correct Method to be used When Testing an Electrical Installation for Earth Loop Impedance: Accurately Measuring the Value of Zs at a Remote End of a Circuit.

Why is Only Half of the Outlet Working

How to Wire a Half Hot Outlet and Switched Outlet: I have a problem with a duplex receptacle where the upper plug does not have power but the lower half does.

Repair a Garage Outlet Circuit that Trips the Breaker

Troubleshooting a Garage Outlet Circuit: While using a new electric chainsaw I accidentally cut the extension cord. I got another cord,plugged it into the same outlet and had no power.

Installing a Track Light and Wall Switch

I want to install Track Lighting on the ceiling, will I need to install a double switch? How to Install a Track Light.

Welder Plug Cables and Plug Adapters

Can a three prong plug be rewired to a four prong twist-lock plug for an AC 225 Arc Welder? Electrical Wiring and Plugs for Arc Welders, Installing the Specified Cord and Welder Plug,

How to Upgrade Home Electrical Wiring

How to Upgrade Knob and Tube Electrical Wiring: Installing New Electrical Wiring in an Older Home.

Older Home Electrical Wiring Problems

Working with Older Home Electrical Wiring: What To Do When an Inspection Reveals Older Home Electrical Wiring Problems.

Help for Lost Power to a Bathroom GFCI Outlet

How to Repair a Bathroom GFI Outlet: Troubleshooting Bathroom Electrical Circuit Problems and Testing a Bathroom GFCI Outlet.

Electrical Troubleshooting for Outlet Wiring

How to Troubleshoot and Repair Wall Outlets: Checking Electrical Wiring Connections, Inspect Wiring to Additional Outlets, Burnt Outlet Wiring Connections.

Installing Electrical Power to a Shop from a Garage

Installing a Sub Panel to another Electric Panel: I have built a new shop close to my garage and would like to install a over head cable to the garage and for a new panel in the shop. How do I connect to the electrical power in the garage breaker box.

Switch Wiring for a Bath Exhaust Fan

How to Wire a Single Switch for a Bathroom Exhaust Fan: Understanding Switch Wiring for a Bathroom Exhaust Fan.

Installing a Ceiling Fan in a Bathroom

How to Plan and Install a Ceiling Fan in an Older Home: I am trying to install a ceiling fan in a bathroom, the house was built in 1922. I am not positive how old the wiring is that I am finding up there but it is old.

Causes of Lost Power to Outlets

Patrick in Iowa. asks: I have no power in half my outlets, what could be the problem? Troubleshooting the Problem of Lost Power to Outlets, How to Locate and Repair Lost Power to Electric Outlets.

To Help You Wire it Right

The Safest Way to Test Electrical Devices and Identify Electric Wires!
The Non-Contact Electrical Tester

This is a testing tool that is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.

The Quickest Way to Check for Faulty Electrical Wiring!
The Plug-In Outlet Tester

This is great to troubleshoot a problem with outlet circuit wiring, is also used by most inspectors to test for power and check the polarity of circuit wiring.
It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect, Very handy and easy to use.

Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!
The Wire Stripper and Wire Cutter

A wire stripping tool used to safely strip electrical wires. This handy tool has multiple uses: The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation. The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets.

Recent Testimonials

I think your site offers the the clearest and best electrical information for homeowners I have ever seen on the net.You have given me confidence to do my own projects which I never had before. THANK YOU!
Paul, from Foxboro, Massachusetts

I wish I found this site earlier, it is by far the best electrical related resource I have found on the web.
George, from Scranton, Pennsylvania

I love this site for an office worker that does not know anything about electric wiring.
Bill, from New York City, New York

This site is so much better than the 3 books I just bought, I wish I came here first.
Collin, from Grand Rapids, Michigan

Thank you for answering my question.
I was able to get this done. This site is perfect. I am glad I found it. Please keep it going.
Mike, from Chicago, Illinois

Read more Comments

Leave a Comment

»How To Wire It RIGHT! «
Wire it with Confidence!
Fully Illustrated
Instant Download

Now You Can
Wire it like a Pro!

Residential Electrical Wiring

Learn Electrical Wiring
Instructional Electrical Wiring Videos

Home Electrical Wiring and Electrical Repairs

Please Note:
Unless otherwise posted, please refer to the following Guidelines when working on Electrical Projects:

Skill Level:
Intermediate to Advanced - Electrical Repairs and Circuit Wiring is Best Performed by a Certified Electrician or Licensed Electrical Contractor.

Electrical Tools Required:
Basic Electricians Pouch of Hand Tools, a Voltage Tester and a Multi Meter.

Estimated Time:
Depends on personal level experience, ability to work with tools, work with electrical wiring, and the available access to the project area.

Precaution:
Identify the project circuit, turn it OFF and Tag it with a Note before working with the wiring.

Important:
Modifying existing electrical circuits or installing additional electrical wiring should be done according to local and National Electrical Codes, with a permit and be inspected.