Why Exterior Electrical Outlets Stop Working
Recently the exterior outlets have gone out. The effected areas are the entrance outlet, the rear outlet, the exterior light as well as the outlet inside the garage…
Electrical Question from Ted about Exterior GFCI Outlets
Background: Ted, a Homeowner from Snohomish, Wa
[ad#block]Question: Recently the exterior outlets have gone out. The house is only 5 yrs old and never had any electrical problems before. I’ve checked the circuit breakers and all seem to be fine. I can’t seem to find a breaker connected to the outlets. The builder of this house is D R Horton and I don’t know if there’s a separate box in the house or not. The effected areas are the entrance outlet, the rear outlet, the mand door exterior light as well as the outlet inside the garage. The outlet that runs my compressor is also out. The compressor is never on unless I need to use it. I hope to figure this out as our security lights on the exterior are not lighting up. Thank you!
Additional Comments: If this works out well I will certainly suggest this to other people.
Thanks for your electrical question Ted.
You most likely have a GFCI outlet or circuit breaker that has tripped off which controls these areas.
Check at all the locations that you have described for a GFCI Outlet and push the reset button. Sometimes the main GFCI outlet is located in the laundry room in a convenient location to make it easy to reset when situations like this occur.
The Following links will assist you with your electrical question:
This link is helpful as a Homeowner
Make sure not to miss these Resources for: How-To-Videos
The following may also be helpful for you:
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical Tester
This is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet Tester
This is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring.
It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire Cutter
My absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires.
This handy tool has multiple uses:
The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation.
The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets..
The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use.
|More articles about GFCI, Troubleshooting and Home Electrical Wiring:|
|« Previous||Next »|
|Ceiling Fan Electrical Wiring Configuration||Ceiling Fan Installation Methods|