» Need Electrical Help? Get a Quick Reply! Ask the Electrician
Electrical Question From Ray About Wiring Diagrams
|
Question: |
Electrical Question about: Wiring Diagrams
Received from Ray an Educator in Massachusetts
[ad#block]Question: I want to wire two 1.5 ton outdoor central air condensers rated 220V 20A each. I was hoping I only had to drag one #8-2AWG from a 40A breaker to one of two sub-panels and then a #10-2AWG to the second sub-panel. Each sub-panel has a 20A breaker. What’s the best way to connect the 8-2AWG and the 10-2 AWG in the first sub-panel?
Additional Comments: don’t have any yet. first time using it.
Dave’s Reply:
Thanks for your electrical question.
The Following links will assist you with your electrical question:
For more information about Outlets
Wiring Outlets
This link is helpful as a Educator
Home Electrical Projects
Make sure not to miss these Resources for: How-To-Pictures
Home Electrical Projects
Be Careful and Be Safe – Never Work on Energized Circuits!
For Best Results Consult a Licensed Electrical Contractor.
Locate An Electrical Contractor in Your Area
The following may also be helpful for you:
Learn more about Home Electrical Wiring
|
||||||||
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical TesterThis is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet TesterThis is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring. It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire CutterMy absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires. This handy tool has multiple uses: The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation. The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets.. The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use. |
||
| More articles about Electrical, Wiring Diagrams and Home Electrical Wiring: | |
| « Previous | Next » |
| Electrical Question From Esperidion About Troubleshooting | Electrical Question About Light Switch Wiring |
