Articles about Circuit

How to Install a Microwave Outlet Circuit for the Kitchen

Updated: January 14, 2020 by: Dave Rongey

Chad in Louisville , Kentucky asks: I am tripping circuits off in my kitchen, do I need another circuit? Installing Dedicated Electrical Circuit Wiring for a Microwave Oven, Appliances they work for about 1-2 minutes and then stop.

Tripping Breaker for a Ceiling Fan and Light

Updated: June 26, 2019 by: Dave Rongey

Billy in Virginia asks: I have a problem with a light circuit where I removed an old light fixture and hung a ceiling fan and wired it into the existing setup then powered the circuit and hit the wall switch to check functions and the breaker tripped.

Microwave Oven Does Not Work Hood Fan Does

Updated: April 21, 2019 by: Dave Rongey

Should I unplug the Microwave Oven or Keep Using the Hood Exhaust Fan? This electrical wiring question involves a High Electric Bill and a Microwave Hood Exhaust Fan in the Kitchen of a Home.

Electrical Problem with Two Circuits from the Same Phase

Updated: October 18, 2016 by: Dave Rongey

How to Identify and Solve Electrical Circuit Problems

Locate and Repair an Electrical Circuit Problem

Updated: August 30, 2012 by: Dave Rongey

Locating a Problem Electrical Circuit and Methods for Electrical Circuit Repair – The electrical circuit will need to be removed from the circuit breaker and a special circuit locating transmitter can be installed onto the wire to help locate the area that has been penetrated.

Signs of a Failing Circuit Breaker

Updated: July 6, 2012 by: Dave Rongey

Indications that a Circuit Breaker May Need to be Replaced

Home Electrical Wiring and Electrical Repairs

Please Note:
Unless otherwise posted, please refer to the following Guidelines when working on Electrical Projects:

Skill Level:
Intermediate to Advanced - Electrical Repairs and Circuit Wiring is Best Performed by a Certified Electrician or Licensed Electrical Contractor.

Electrical Tools Required:
Basic Electricians Pouch of Hand Tools, a Voltage Tester and a Multi Meter.

Estimated Time:
Depends on personal level experience, ability to work with tools, work with electrical wiring, and the available access to the project area.

Precaution:
Identify the project circuit, turn it OFF and Tag it with a Note before working with the wiring.

Important:
Modifying existing electrical circuits or installing additional electrical wiring should be done according to local and National Electrical Codes, with a permit and be inspected.