Articles about Outlets from Switches

Adding an Outlet to a Wall Switch

By Dave Rongey

Steve in Illinois asks: My kitchen has an exterior wall with a door that goes out onto a patio, with a switch inside near the door going outside that is the only one controlling an overhead kitchen light. I drilled a hole through the brick to add an outlet outside, piggybacking off the kitchen light switch.

Adding an Outlet to a Light Switch

By Dave Rongey

How Switch Wiring Can Be Used for Receptacle Outlets: If a power source is located that does not have a ground wire then a 2-wire outlet that does not have a ground prong will need to be installed.

Home Electrical Wiring and Electrical Repairs

Please Note:
Unless otherwise posted, please refer to the following Guidelines when working on Electrical Projects:

Skill Level:
Intermediate to Advanced - Electrical Repairs and Circuit Wiring is Best Performed by a Certified Electrician or Licensed Electrical Contractor.

Electrical Tools Required:
Basic Electricians Pouch of Hand Tools, a Voltage Tester and a Multi Meter.

Estimated Time:
Depends on personal level experience, ability to work with tools, work with electrical wiring, and the available access to the project area.

Precaution:
Identify the project circuit, turn it OFF and Tag it with a Note before working with the wiring.

Important:
Modifying existing electrical circuits or installing additional electrical wiring should be done according to local and National Electrical Codes, with a permit and be inspected.