»NEW eBOOK«

Articles about 120 Volt Circuit

How to Install an Outdoor Electrical Outlet

By Dave Rongey

Install Wiring for an Outdoor Outlet: What is the best way to install a 110volt outlet outdoors? The Methods for Installing an Outdoor Outlet.

What is The Purpose of the Neutral Wire

By Dave Rongey

The Purpose of the Neutral Wire in Electrical Systems: What is the purpose of the neutral wire and the difference between the ground wire and the white neutral wire.

Should You Tap 220 Electrical Wiring for a 120 Volt Circuit?

By Dave Rongey

Splicing a 220-240 Volt Multi-Wire Branch Circuit for 110-120 Volts: Considerations when trying to provide a source for 110 volt or 120 volt power, Understanding 220, 230 and 240 volt Electrical Circuits.

How to Make 120 Volts from 220 Volts

By Dave Rongey

Converting a 220Volt Circuit to 120Volt: A Safe Method for Creating 120Volt from 220Volt, Splitting a 220Volt Circuit to 120Volt.

Home Wiring Advice – Be Careful Where You Get It From

By Dave Rongey

Beware of Bad Advice about Home Electrical Wiring – Silly advice and incorrect information can be a problem – This circuit wire size should always stay the same size with few exceptions, and yes, a 15 amp circuit breaker is the right size for 14 AWG copper.

How To Check An Electrical Appliance Outlet

By Dave Rongey

Home Outlet Testing Made Easy: Testing home receptacle outlets can be easily done by using a plug in circuit analyzer.

» How to Wire it Right «

Home Wiring Guide

ELECTRICAL SAFETY

Electrical Wiring and Electrical Repairs

Unless otherwise posted, please refer to the following Guidelines for Electrical Projects:
Skill Level:
Intermediate to Advanced - Electrical Repairs and Circuit Wiring is Best Performed by a Certified Electrician or Licensed Electrical Contractor.
Find An Electrician
Electrical Tools Required:
Basic Electricians Pouch of Hand Tools, a Voltage Tester and a Multi Meter.
Estimated Time:
Depends on personal level experience, ability to work with tools, work with electrical wiring, and the available access to the project area.
Precaution:
Identify the project circuit, turn it OFF and Tag it with a Note before working with the wiring.
Important:
Modifying existing electrical circuits or installing additional electrical wiring should be done according to local and National Electrical Codes, with a permit and be inspected.