Articles about

Low Volt Relay Control Wiring Diagram

When the 24V is applied to the relay the relay just “Buzzes” but contacts in the relay don’t close to pass through the 240V AC. The relay has a manual test button and if I press this everything works fine…

Locating Hard To Find Electrical Switches

I have a rectangular 3 rocker isolating switch in my fitted kitchen that controls my fridge/freezer, dish washer & washer/dryer…

Kitchen Cooker Tripping Electric Switch

Having 2 rings on i turned on a 3rd, a flash appeared from what looked like inside the cooker.
I switched everything off including the wall socket, proceeded to reset the trip switch….

Digital Phone Jack Wiring

I just moved into a new house (to me). Got digital phone via cable. If I plug a standard phone into the supplied modem, phones elsewhere in the house I get dial tone, but they will not ring on an incoming call…

Wall Sconce Switch Electrical Wiring Diagram

I need a wiring diagram for a wall sconce with a pull chain switch and an outlet not controlled by the switch.(hot) Only two wires coming from the wall…

Multi Unit Building with 4 Electrical Meters

I have a multi-unit building with 4 meters and 4 electrical boxes. One of the boxes is for common areas but it has a breaker which one of the tenants should be paying for….

House Electrical Rewiring Methods and Practices

I had my house rewired recently, I went to look at the wires and was surprised. For example, a wire would come from the box and go to an area of the house then into a junction box…

« Previous Page

Electrical Tips

To Help You Wire it Right

The Safest Way to Test Electrical Devices and Identify Electric Wires!
The Non-Contact Electrical Tester

This is a testing tool that is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.

The Quickest Way to Check for Faulty Electrical Wiring!
The Plug-In Outlet Tester

This is great to troubleshoot a problem with outlet circuit wiring, is also used by most inspectors to test for power and check the polarity of circuit wiring.
It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect, Very handy and easy to use.

Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!
The Wire Stripper and Wire Cutter

A wire stripping tool used to safely strip electrical wires. This handy tool has multiple uses: The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation. The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets.

Recent Testimonials

I think your site offers the the clearest and best electrical information for homeowners I have ever seen on the net.You have given me confidence to do my own projects which I never had before. THANK YOU!
Paul, from Foxboro, Massachusetts

I wish I found this site earlier, it is by far the best electrical related resource I have found on the web.
George, from Scranton, Pennsylvania

I love this site for an office worker that does not know anything about electric wiring.
Bill, from New York City, New York

This site is so much better than the 3 books I just bought, I wish I came here first.
Collin, from Grand Rapids, Michigan

Thank you for answering my question.
I was able to get this done. This site is perfect. I am glad I found it. Please keep it going.
Mike, from Chicago, Illinois

Read more Comments

Leave a Comment

»How To Wire It RIGHT! «
Wire it with Confidence!
Fully Illustrated
Instant Download

Now You Can
Wire it like a Pro!

Residential Electrical Wiring

Learn Electrical Wiring
Instructional Electrical Wiring Videos

Home Electrical Wiring and Electrical Repairs

Please Note:
Unless otherwise posted, please refer to the following Guidelines when working on Electrical Projects:

Skill Level:
Intermediate to Advanced - Electrical Repairs and Circuit Wiring is Best Performed by a Certified Electrician or Licensed Electrical Contractor.

Electrical Tools Required:
Basic Electricians Pouch of Hand Tools, a Voltage Tester and a Multi Meter.

Estimated Time:
Depends on personal level experience, ability to work with tools, work with electrical wiring, and the available access to the project area.

Precaution:
Identify the project circuit, turn it OFF and Tag it with a Note before working with the wiring.

Important:
Modifying existing electrical circuits or installing additional electrical wiring should be done according to local and National Electrical Codes, with a permit and be inspected.