» Need Electrical Help? Get a Quick Reply! Ask the Electrician
Wiring for a Electric Panel in a Pump House and a Home
|
Can we run power from the electric utility pole to a large pump house main panel and then to a panel at the main house? By: Dave Rongey |
Electrical Code General Question for a Main Panel
Electrical Question: Can we run power from the electric utility pole to a large pump house main panel and then to a panel at the main house?
My electrical wiring project involves installing a Main Panel for a New Home.
- New home build coming up with a future shop in the plans. The well and shop will be fairly close, within 100 feet, to the pole and the house about 200 feet away from those. My question is can we run power from pole to a large pump house, with slab, and locate the main panel with meter on that building? We would run sub panels in the house and garage.
This electrical wiring question came from Kevin, a Homeowner in Snohomish, Washington.
Additional Comments: Just found this site and it has so much info.
Dave’s Reply:
Thanks for your electrical wiring question Kevin.
How to Electrical Code General Question Main Panel All Areas
Application: Installing an Electrical Service to a Home.
Skill Level: Intermediate to Advanced – Best performed by a Licensed Electrical Contractor, or Certified Electrician.
Electrical Tools Required: Basic Electricians Pouch Hand Tools, Voltage Tester, and appropriate Safety Gear.
Estimated Time: Depends on the personal level experience, ability to work with tools, install electrical circuit wiring, and the available access to the project area.
Electrical Safety: Identify the electrical power source to the Main Panel, turn it OFF and Tag with a Note before working with the electrical wiring.
Electrical Wiring Parts and Materials: Electrical parts and materials for the Main Panel should be approved for the specific project and compliant with local and national electrical codes.
Electrical Codes and Inspections: Installing or changing home electrical wiring should be done according to local and national electrical codes as adopted in Snohomish, Washington. A permit and inspections may also be required.
Resources to help you do electrical wiring in your area:
Locate Electricians or Electrical Contractors in Washington
Washington Electrical Contractor License, Building Permits and Electrical Codes
Basic Electrical Code General Question for a All Areas Main Panel
This electrical wiring project is about locating the main electric panel at a pump house which then supplies power to a workshop, the home, and a garage.
Main Electric Panel at a Pump House with a Sub Panel at the Home
For dwellings such as this you do have the option to have the meter main panel at the pump house, and then feed off of that to the home and shop panels. It’s a great idea and works out very well. Just be sure to size your panel feeder cables accordingly for the amperage and the distance, and factor in any large equipment such as air conditioners etc., as you do not want to have the voltage drop when a large load starts up. The website has wire sizing calculators and panel load calculators that may help you. You can find links to these calculators listed on the home page of the website.
Pump House Electric Wiring
Also be sure to have provision in the pump house for the pump, a light, and outlet for service work and if needed for heat cable if this is a cold area. You would be surprised how many folks do not plan for these things and regret it later.
More about Electric Panels and House Electrical Wiring
House Wiring Circuits and Circuit Breakers
This article looks at common 120 volt and 240 volt house wiring circuits and the circuit breakers that are installed identifying the types and amperage sizes used in most homes.
Electrical Panel Circuit Listing
How to Install Garage Electrical Wiring
Garage Electrical Wiring
Fully Explained Photos and Wiring Diagrams for Garage Electrical Wiring with Code Requirements for most new or remodel projects.
Basic Home Wiring Diagrams
Using Electrical Testers and Voltage Meters
Understanding Digital Volt Meters
When working on home electrical wiring using voltage meter can play an important part in electrical safety. Electrical testers and voltage meters enable you to identify electrical circuits and help prevent the possibility of accidental electrical shock
Types of Electrical Testers
Using Electrical Testers and Voltage Meters
The following may also be helpful for you:
Learn more about Home Electrical Wiring
|
||||||||
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical TesterThis is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet TesterThis is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring. It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire CutterMy absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires. This handy tool has multiple uses: The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation. The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets.. The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use. |
||
| More articles about Electrical Wiring, Home Wiring Electrical and Home Electrical Wiring: | |
| « Previous | Next » |
| Wiring for GFCI Outlets | Wiring L1 and L2 on a 240 Volt Motor |
