Wiring Connections for an Electric Water Heater
What are the Wiring Connections for a Water Heater? The Electrical Connections for a 50Gal 240 Volt Electric Water Heater.
Electric Water Heater
Electrical Question: How should I wire a 50Gal Water Heater?
I’m connecting an electric water heater to the electrical junction box. I have a A. O. Smith 50 Gal Water Heater that has a red and black wire. The electrical junction box has red, black, white and ground. Please give advise.
Background: Perry, a Handyman from El Mirage, Arizona.
Additional Comments: Great.
Thanks for your electrical wiring question Perry.
How to Wire a Water Heater
Skill Level: Intermediate to Advanced – Best performed by a Licensed Electrician.
Tools Required: Basic Electricians Pouch Hand Tools and Voltage Tester.
Estimated Time: Depends on the personal level experience and ability to work with tools and access to the wiring.
Precaution: Identify the water heater circuit, turn it OFF and then Tag it with a Note before performing any wiring.
Special Materials: Properly sized wire connectors and a blank cover.
Electrical Connections for a 50Gal Water Heater
- Identify the circuit for the hot water heater and make sure it is turned off.
- If the incoming electrical circuit has a black, red, white and ground wire then the white or neutral wire is caped off and not connected unless your water heater requires a separate neutral wire.
- The bare ground wire of the incoming circuit is bent into a clockwise hook shape and placed under the green ground screw and secured tightly. This screw is located inside the water heater junction box, or the water heater may have a green ground wire that may be used.
- The typical 240 volt water heater has a red and black wire located in a junction box at the top of the water heater.
- The incoming circuit wires and the water heater wires are normally black and red, and are splices or connected together, color to color using red or gray wire nuts.
- If the incoming electrical circuit wiring does not have a separate red wire, then the white wire may be used as the second 120 volt circuit of the 2-pole 240 volt circuit, and should be indicated with a black or red wrap of electrical tape of permanent marker. If unsure about the incoming circuit then the circuit should be verified by an electrician with a voltage tester.
More about Electrical Wiring
For more information about 220 Volt Wiring Diagram
220 Volt Wiring Diagram
This link is helpful as a Handyman
Make sure not to miss these Resources for: How-To-Videos
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical Tester
This is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet Tester
This is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring.
It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire Cutter
My absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires.
This handy tool has multiple uses:
The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation.
The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets..
The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use.
|« Installing a Dryer Circuit and Breaker||Why A Bathroom Light May Not Be Working »|