Why Stovetop Controls Are In The Back
Electric Stove Top Features and Safety Concerns – There is one safety feature that I believe it helps with and that is keeping the knobs out of the reach of children who would normally be able to turn on the burners which could lead to a number of hazards.
One Electrical Safety Feature Leads to Another
[ad#block] Electrical Question: Why do US electric ranges almost always have their control knobs at the back where you have to reach over steaming hot pans to change the heat settings?
- I know there are some – expensive – models that have front controls like gas ranges, also some – expensive – drop-in models that have side controls.
- What I can’t understand is why every electric range I ever had in Britain, whether expensive or basic, always had front controls.
- And they all also had a separate broiler so you could bake in the oven and broil under the broiler at the same time.
All I get told is it’s a wiring issue.
This electrical question came from: Lynda, a Homeowner from Butler PA
See more about Home Wiring for Pennsylvania
Additional Comments: So far – giving me an education!
Thanks for your electrical question Lynda.
Electric Stove Top Features and Safety Concerns
- Lynda, your absolutely right – it is a little awkward isn’t it, And I do not believe that it is a wiring issue.
- However there is one safety feature that I believe it helps with and that is keeping the knobs out of the reach of children who would normally be able to turn on the burners which could lead to a number of hazards.
The Following will assist you with your electrical range:
- Wiring a Kitchen Range Power Cord
- Fully Described Electric Range Installation with a typical 220 Volt electric power cord wiring system. You may find yourself with either a 3-wire or 4-wire electric range. Lets look at how the electric range is wired and what to do if your cord does not match the plug.
- Wiring Options for a Kitchen Oven
- Fully Described Kitchen Electric Oven Installation with a typical 220 Volt electric circuit. You may find yourself with either a 3-wire or 4-wire electric oven. Lets look at how the electric oven is wired and the possible solutions if your circuit does not seem to the same.
You identified your project to be about Home Wiring,
so you might find this information useful:
- Home Wiring
- Basic Home Wiring Diagrams with Pictures
The following may also be helpful for you:
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical Tester
This is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet Tester
This is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring.
It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire Cutter
My absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires.
This handy tool has multiple uses:
The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation.
The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets..
The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use.
|More articles about Kitchen Electrical, Range and Home Electrical Wiring:|
|« Previous||Next »|
|Infrared Sauna Electrical Circuit||Wiring a Switch Outlet Combination|