Why Does My Ceiling Fan Switch Off
|
I replaced a light fixture with a ceiling fan and light kit. The ceiling fan works fine, but the light kit only worked for an hour then switched off… |
Electrical Question from Chris about Ceiling Fan Wiring
Background: Chris, a Handywoman from Tallahassee, FL
[ad#block]Question: I replaced a light fixture with a ceiling fan and light kit. The ceiling fan works fine, but the light kit only worked for an hour then switched off. I used the bulbs included in the kit so the wattage of 190 watts wasn’t exceeded. I disconnected and then reconnected the light kit and it turned on again but am afraid this will happen again. Any ideas about what to do?
Dave’s Reply:
Thanks for your electrical question Chris.
The Following links will assist you with your electrical question:
Troubleshooting Electrical Wiring
For more information about Ceiling Fan Wiring
Ceiling Fan Wiring
This link is helpful as a Handywoman
Do-It-Yourself Electrical
Make sure not to miss these Resources for: Electrical Safety
Home Electrical Safety
Be Careful and Be Safe – Never Work on Energized Circuits!
For Best Results Consult a Licensed Electrical Contractor.
Locate An Electrical Contractor in Your Area
The following may also be helpful for you:
Learn more about Home Electrical Wiring
|
||||||||
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical TesterThis is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet TesterThis is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring. It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire CutterMy absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires. This handy tool has multiple uses: The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation. The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets.. The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use. |
||
| More articles about Ceiling Fans, Wiring Configurations and Home Electrical Wiring: | |
| « Previous | Next » |
| Why is it Called 3-Way Switch | 220 Volt Dryer Circuit Wiring |
