What is the required distance of communication conductors to power?
|
There should be a minimum of 12 inches separation between communications cables and power cables. Crossing at 90 degrees is…. |
Electrical Question from Ronald about the separation of communications and power cables
[ad#block]Question: What is the required distance of communication conductors from conductors of any electric light or power circuit?
Additional Comments: Its educational and totally for improvement of electrical skills.
Dave’s Reply:
Thanks for your electrical question Ronald. Great Question. There should be a minimum of 12 inches separation between communications cables and power cables. Crossing at 90 degrees is ok when necessary. If the communications cable is not shielded then it would be best to be further away to avoid emf and noise disturbances.
PS – I sure miss the Philippines! Totally enjoy Filipino people and the wonderful food, including Adobo, Pandesal and Guanabana Juice – Salamat Po! (This question was from the Philippines, where I have been several times.)
The Following links will assist you with your electrical question:
For more information about 220 Volt Wiring Diagram
220 Volt Wiring Diagram
This link is helpful as a Electrician
Electrical Code Articles
Make sure not to miss these Resources for: Wiring Diagrams
Wiring Diagrams
Be Careful and Be Safe – Never Work on Energized Circuits!
For Best Results Consult a Licensed Electrical Contractor.
Locate An Electrical Contractor in Your Area
The following may also be helpful for you:
Learn more about Home Electrical Wiring
|
||||||||
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical TesterThis is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet TesterThis is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring. It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire CutterMy absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires. This handy tool has multiple uses: The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation. The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets.. The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use. |
||
| More articles about Electrical, Philippines and Home Electrical Wiring: | |
| « Previous | Next » |
| Can I install a switch and outlet wire in the same hole? | Wiring a light remote control separately from the ceiling fan motor |
