Upgrading a Home Electrical Service Panel
How to Upgrade a Home Electrical Service – Planning for a successful home service panel upgrade.
Considerations When Upgrading Home Electrical Panels
[ad#block] Electrical Question: I want to upgrade from a 120 volt electrical service coming in my house to a 240 volt electrical service.
How could I do this?
This electrical wiring question came from: Cory, a Homeowner from NEW WINDSOR, New York.
Thanks for your electrical wiring question Cory.
How to Upgrade a Home Electrical Service
Skill Level: Advanced – Licensed Electrical Contractor. Best performed by a Licensed Electrician or Electrical Contractor.
Tools Required: Electricians pouch of hand tools and the various power tools necessary for the specific service upgrade.
Estimated Time: Depends on the type of panel and available access to the project area.
Precaution: This is an extensive project that should be performed by a Licensed Electrical Contractor.
Notice: Making changes to the Electrical Service Panel should be done with a permit and be inspected.
Upgrading a home electrical service is always a good idea, but it is a project that takes a lot of consideration and planning. The whole project would take a few pages to explain and I will produce a series about this in the near future, but here are a few thoughts for planning for a successful home service panel upgrade before the project begins.
Considerations when Upgrading a Home Electrical Service Panel
- How large is the home.
- List the existing electrical circuits.
- List the proposed electrical circuits or devices that you wish to add.
- Consider upgrading the kitchen circuits with at least 2 20 amp GFCI circuits, plus any additional circuits for major electrical devices and equipment.
- Consider upgrading the bathroom circuit to a dedicated 20 amp GFCI.
- Consider adding smoke detectors.
These are just a few items that should be considered because they will help determine the amperage size of the electrical service panel which is typically between 100 to 200 amps, 120/240 volts.
Be sure to contact your local building department to see what there specific electrical requirements are for your specific area.
For more information about Rewiring a Home
Rewiring a Home
Rewiring a Home
Great ideas for home electrical rewiring that will add value to your home and bring it up to the current safety and energy efficient electrical codes.
This link is helpful as a Homeowner
The following may also be helpful for you:
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical Tester
This is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet Tester
This is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring.
It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire Cutter
My absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires.
This handy tool has multiple uses:
The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation.
The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets..
The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use.
|More articles about Electrical Repair, Panel Upgrade and Home Electrical Wiring:|
|« Previous||Next »|
|Shocking Kitchen Garbage Disposal Problem||How to Fix Electrical Outlets with Power Problems|