The breaker to my Central Air system keeps tripping
Electrical Question from Rudy about Troubleshooting [ad#block]Question: The breaker to my Central Air system keeps tripping after a few hours of running, and it is almost always as soon as it hits the temperature set on the thermometer. I had the air conditioning unit outside checked (no issues) and the Air Handler with thermometer are […]
Electrical Question from Rudy about Troubleshooting
[ad#block]Question: The breaker to my Central Air system keeps tripping after a few hours of running, and it is almost always as soon as it hits the temperature set on the thermometer. I had the air conditioning unit outside checked (no issues) and the Air Handler with thermometer are about 1 year old. Additionally, I replaced the breaker just to see if that was the issue – no luck. Even replaced the battery in the thermometer unit. Oddly enough, I can run the heat without any issues at all. Any advice on how I might be able to track this down? I could certainly use the help. The house is currently for sale and I’d like to address now vs when I am required to fix with little time or cash on hand.
Thank You – Rudy
Additional Comments: Looks good to me.
Thanks for your electrical question Rudy. I would have an HVAC, Heating Ventilation and Air Conditioning Service Technician come out and check the unit. It sounds like the compressor unit should be checked. The HVAC technician will connect their gauges and check refrigerant levels and most likely use a clamp on amp meter to check the amperage load of the unit.
The Following links will assist you with your electrical question:
For more information about Troubleshooting
Troubleshooting Electrical Wiring
This link is helpful as a Handyman
Make sure not to miss these Resources for: How-To-Pictures
Home Electrical Projects
Be Careful and Be Safe – Never Work on Energized Circuits!
For Best Results Consult a Licensed Electrical Contractor.
Locate An Electrical Contractor in Your Area
The following may also be helpful for you:
Learn more about Home Electrical Wiring
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical Tester
This is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet Tester
This is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring.
It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire Cutter
My absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires.
This handy tool has multiple uses:
The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation.
The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets..
The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use.
|More articles about Electrical and Home Electrical Wiring:|
|« Previous||Next »|
|What gauge or type wire for sink disposal to wall socket?||My new ceiling fans trip the circuit breaker|