Articles about air conditioner

Adding An Air Conditioner With a 9 Amp Rating

Unfortunately most room air conditioners require a dedicated circuit. Depending on how loaded the 20 amp bedroom outlet circuit is….

Category:

Electrical Question From Robert About Troubleshooting

Question: Unfortunately, we are having to turn our air conditioners on already in the Midwest. I have two units, one for each level of my house. My unit downstairs will not turn on. I checked the fuse outside and swapped it with the upstairs unit and it still did not work.

Category:

Electrical Question From Ashley About Troubleshooting

On my air conditioning condenser unit outside, I have an issue with my blower fan motor not running when switched on.

Category:

Electrical Question From Ray About Wiring Diagrams

Question:
I want to wire two 1.5 ton outdoor central air condensers rated 220V 20A each. I was hoping I only had to drag one #8-2AWG from a 40A breaker to one of two sub-panels and then a #10-2AWG to the second sub-panel.

Category:

« Previous Page

»How To Wire It RIGHT! «
Wire it with Confidence!
Fully Illustrated
Instant Download

Now You Can
Wire it like a Pro!

Residential Electrical Wiring

Learn Electrical Wiring
Instructional Electrical Wiring Videos

Home Electrical Wiring and Electrical Repairs

Please Note:
Unless otherwise posted, please refer to the following Guidelines when working on Electrical Projects:

Skill Level:
Intermediate to Advanced - Electrical Repairs and Circuit Wiring is Best Performed by a Certified Electrician or Licensed Electrical Contractor.

Electrical Tools Required:
Basic Electricians Pouch of Hand Tools, a Voltage Tester and a Multi Meter.

Estimated Time:
Depends on personal level experience, ability to work with tools, work with electrical wiring, and the available access to the project area.

Precaution:
Identify the project circuit, turn it OFF and Tag it with a Note before working with the wiring.

Important:
Modifying existing electrical circuits or installing additional electrical wiring should be done according to local and National Electrical Codes, with a permit and be inspected.