Smoke Detectors for the Home
What is a typical amperage of a home smoke detector and a home duplex outlet…
Smoke Detectors for the Home
Background: Edward, a Homeowner from Los Angeles CA.
[ad#block]Question: What is a typical amperage of a home smoke detector and a home duplex outlet.
Thanks for your electrical question Edward.
A typical construction project will require a smoke detector in each bedroom and on the ceiling or wall at a point centrally located in the area giving access to bedrooms such as hallways. Mount smoke detectors at least 4″ from wall or on the wall with the top of the detector within 4″ and 12″ of the highest point of the ceiling. In multi-story units there shall be a detector at each level and shall be placed at the center of the ceiling 24″ or more higher than the hall are required to have a smoke detector on the hall ceiling and in the bedroom. In new construction when more than one smoke detector is required to be installed within an individual dwelling, the detectors shall be interconnected by installing the electrical wiring in such a manner that the actuation of one alarm will activate all of the alarms in the dwelling.
The Following links will assist you with your electrical question:
Take the mystery out of smoke detector wiring. Smoke alarms provide the earliest warning of both fire and smoke.
The following may also be helpful for you:
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical Tester
This is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet Tester
This is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring.
It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire Cutter
My absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires.
This handy tool has multiple uses:
The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation.
The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets..
The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use.
|More articles about Smoke Detectors and Home Electrical Wiring:|
|« Previous||Next »|
|Is Welding Cable Permitted for a 200 Amp Electrical Service||Electrical Voltage Regulator Output|