Electrical Wiring for Light Fixtures
Is the electrical wiring safe for the light fixture I want to install? The Current Rating of Electrical Wires for Light Fixtures, Installing a Light Fixture, Wiring a Light Fixture.
Old Wiring for Light Fixtures
Electrical Question: Is the electrical wiring safe for the light fixture I want to install?
- My house is 38 years old, and I’m wondering if my electrical supply wires can handle the current that a light fixture will need.
- I’m installing a chandelier light fixture in my kitchen.
- The previous owner removed the old light fixture.
- I found the following printed on one of the wires of the light fixture: “18AWGX2C 105(degree symbol)C 300V”.
- From what I understand, this means the electrical supply wires need to be rated for 105 degrees.
- There is nothing printed on the supply wires to indicate a rating.
- Do you think it would be dangerous to install this light fixture?
This Electrical Wiring question came from: Matt, from Philadelphia, Pennsylvania.
Thanks for your electrical question about light fixtures Matt.
Electric Circuit Wiring for Light Fixtures
Application: Electrical Wiring for a Light Fixture.
Skill Level: Beginner to Intermediate – Best performed by a Licensed Electrician.
Tools Required: Basic Electricians Pouch Hand Tools, a non-aluminum ladder and Voltage Tester.
Estimated Time: Depends on personal level experience, ability to work with tools and access to the light fixture.
Precaution: Identify the light circuit, turn it OFF and Tag it with a Note before working with the wiring.
Notice: Installing additional light fixture wiring should be done according to local and national electrical codes with a permit and be inspected.
Light Fixtures and Old Electric Wire Ratings
- Electrical Current Rating of Electrical Wires for Light Fixtures
- If the home electrical wiring is original then the circuit wiring should be fine and rated for 15 amps minimum.
- This can be verified by identifying the circuit that the light fixture will be installed on and check the circuit or fuse rating, which should be either 15 or 20 amps, as installed.
- Because the light fixture has 18 gauge AWG wire this would indicate that the wire size is smaller and the amperage of the light fixture will be under 15 amps.
- To find out what the exact electrical load of the light fixture simply make a list of the number of light bulbs and the watts of the bulbs, perform the math and you will have the total number of watts for your chandelier fixture.
- Most of the popular brand name light fixtures will have a UL Approved listing or label which will indicate that the light fixture and all of its components, light sockets and wiring have been tested to be safe for the specific application and installation.
More about Light Fixture Electrical Wiring
Electrical Wire for the Home
- Complete listing of electrical wire types and parts used for home projects with electrical code information serves as selection guidelines.
- How to Install Kitchen Electrical Wiring
Kitchen Electrical Wiring
- Fully Explained Photos and Wiring Diagrams for Kitchen Electrical Wiring with Code Requirements for most new or remodel projects.
- Lighting For The Home
- Lighting Electrical Codes
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical Tester
This is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet Tester
This is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring.
It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire Cutter
My absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires.
This handy tool has multiple uses:
The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation.
The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets..
The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use.
|More articles about Electrical Wiring, Lighting and Home Electrical Wiring:|
|« Previous||Next »|
|Electrical Troubleshooting after a Power Outage||Making Changes to Wall Switch Wiring|