Replacing a Dimmer With A Light Switch
How To Replace a Dimmer Switch with a Light Switch: Wiring a Light Switch to Replace a Dimmer Switch.
Dimmer Switch to a Light Switch
Electrical Question: I have a dimmer switch that needs replacing.
- Can I replace the dimmer switch with a single pole switch?
- The dimmer switch has a white, a red and a black wire coming into it.
- Can I replace the switch with the single switch using existing wires or do I have to replace with another dimmer switch?
- Thus converting the dimmer to a simple on and off switch?
- If yes, where should I connect the red, black and white wires on the single switch?
This electrical wiring question came from: Robert, a Homeowner from Dothan, Alabama.
Thanks for your electrical wiring question Robert.
How To Replace a Dimmer Switch with a Light Switch
Skill Level: Beginner to Intermediate – Best performed by a Electrical Contractor or a Licensed Electrician.
Tools Required: Basic Electricians Pouch Hand Tools, a non-aluminum ladder and Voltage Tester.
Estimated Time: Depends on personal level experience, ability to work with tools and access to the light fixture(s).
Precaution: Identify the light circuit, turn it OFF and Tag it with a Note before working with the wiring.
Wiring a Light Switch to Replace a Dimmer Switch
- You can replace the dimmer switch with a regular light switch, only from what you have described you need to install a 3-way light switch, not a single pole light switch.
- The typical connections are as follows:
- The black wire to the lone screw on the 3-way light switch.
- This is usually identified as the point or common and the screw is usually a darker color than the two screws at the other end of the switch.
- The red and white wires should be able to be placed on either of the remaining screws at the other end of the switch, one wire on each screw of course.
- Additional wiring diagrams can be found from the links below as well.
More about How to Wire a Light Switch
- 3 Way Dimmer Switch Wiring Diagram
- Fully explained 3 way dimmer switch wiring diagram will take the mystery out of wiring a 3-way dimmer switch.
- Electrical Wire for the Home
- Complete listing of electrical wire types and parts used for home projects with electrical code information serves as selection guidelines.
For more information about Light Switch Wiring
Light Switch Wiring
- Wiring a Light Switch – Diagram 1
- Fully explained pictures and wiring diagrams about wiring light switches describing the most common switches starting with photo diagram 1.
This link is helpful as a Homeowner
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical Tester
This is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet Tester
This is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring.
It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire Cutter
My absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires.
This handy tool has multiple uses:
The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation.
The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets..
The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use.
|More articles about Electrical Wiring, Replacing a Dimmer Switch and Home Electrical Wiring:|
|« Previous||Next »|
|How to Fix an In Rush Power Problem and Tripped Circuit Breaker||Hot Tub 4-Wire Circuit|