Repair Lost Power to a Ceiling Light Fixture
|
How to Repair Lost Power to a Ceiling Light Fixture |
How to Repair Lost Power to a Ceiling Light Fixture
[ad#block]Electrical Question: I am trying to figure out why my downstairs ceiling light went out. I have power going into the switch and power going to the light. There are 3 white wires that go into a butt connector every time I move them there’s an arc and the power goes off downstairs but when i move them back it comes back on. How do I fix the short?
This electrical question came from: Kenneth, a Homeowner from Rangely, Colorado.
See more about Home Wiring for Colorado
Additional Comments: A lot of info
Dave’s Reply:
Thanks for your electrical question Kenneth.
Repair Lost Power to a Ceiling Light Fixture
Repairing a Wiring Splice
- Kenneth, butt splice connectors or end to end connectors do not work well for electrical connections involving solid wire, which is found in most home electrical circuit wiring.
- When it is found that the butt-splice connector has become faulty then the circuit will need to be identified and shut off, and the affected splice will need to be removed and replaced with a screw on type wire nut connector.
- When splices become faulty it can affect the light fixture and other areas of the branch circuit wiring as well.
- A faulty electrical wiring splice can cause overheating and sparking which can eventually create a hazardous condition due to a burnt connection which should be repaired right away.
- Electrical repairs such as this are best performed by a qualified licensed electrician.
RESOURCES
[ad#block2]electrical wire
Electrical Wire for the Home
Complete listing of electrical wire types and parts used for home projects with electrical code information serves as selection guidelines.
For more information about Lost Power
Lost power
Lost Power
Licensed Electrician Reveals the Secrets of Successful Electrical Troubleshooting Methods used to solve the majority of the home electrical problems and wiring failures encountered.
This link is helpful as a Homeowner
Do-It-Yourself Electrical
The following may also be helpful for you:
Learn more about Home Electrical Wiring
|
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical TesterThis is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet TesterThis is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring. It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire CutterMy absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires. This handy tool has multiple uses: The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation. The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets.. The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use. |
More articles about Lost Power to Light Fixture and Home Electrical Wiring: | |
« Previous | Next » |
Home Electrical Wiring Corrections | Four Way Light Switch Wiring for Light Fixtures |