Relocating and Splicing an Underground Electrical Circuit
How to move and splice an underground electrical circuit
Moving and Splicing an Underground Circuit
[ad#block]Question: I have an outdoor hot tub that needs to be moved about ten feet. However, a deck that has since been built over a portion of the buried line, for ease, I would like to dig up the line ( in conduit) that is accessible and splice the wire at that point. I would then attach a junction box at the deck and then re-dig the trench to the new location. Is this an acceptable solution ? or does the wire need to be in one piece for the entire length ? Also , If the junction box is acceptable,how high off the ground does it need to be ? The deck is only 14 inches high.
Any help is greatly appreciated!
This electrical question came from: Bob, from Mt. Clemens, Michigan
See more about Home Wiring for Michigan
Thanks for your electrical question Bob
Relocating and Splicing an Underground Circuit
Bob, the conduit can be dug up and relocated, and the circuit may be spliced. The location for the junction box will determine the type of junction box that will be used and the method of the circuit wire splice that will be acceptable. The key is that the junction box must be accessible, weather it is in the ground in an acceptable enclosure and using approved splice methods, or above ground, however if above ground then the enclosure should not be located within close proximity of the hot tub. If the enclosure is metallic then it must be grounded.
The Following links will assist you with your electrical question:
The following may also be helpful for you:
Learn more about Home Electrical Wiring
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical Tester
This is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet Tester
This is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring.
It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire Cutter
My absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires.
This handy tool has multiple uses:
The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation.
The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets..
The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use.
|More articles about Splicing a Cable and Home Electrical Wiring:|
|« Previous||Next »|
|Electrical Wiring for a Bathroom||Installing Xenon Under Cabinet Lighting for Best Results|