Problem With Dimplex Electric Heater Unit
Why a Remote Heater Control Unit May Prevent Your Dimplex Heater From Working
Heater with a Remote Control Unit that Stops Working
Question: I have a Dimplex heating unit in my home office. It has a remote device for on and off operation.
- The remote works for a short period of time and then stops operation.
- The company has replaced the unit 4 times and the problem persists.
- I note that the cord from the outlet is extremely hot.
- The customer service at Dimplex states that the remote is heat sensitive, which is probably the causing the remote to malfunction.
Question: why is this happening from a standard outlet and is there a way of correcting the problem?
This electrical question came from: Walker, a Homeowner from Philadelphia, PA
Thanks for your electrical question Walker.
Why a Remote Heater Control Unit May Prevent Your Heater Fromm Working
- I can see that you are not the only one having a problem with these electric heating units.
- I can only speculate that there may be a design problem because some of the Dimplex remote controls have been discontinued.
- I would be concerned if the cord gets extremely hot as you have mentioned.
- This would indicate that the wire size is too small for the amount of current that is being used.
The Following links will assist you with your electrical question:
electrical outlet wiring
Wiring Electrical Outlet for the Home
Home electrical wiring includes 110 volt outlets and 220 volt outlets and receptacles
which are common place in every home.
See how wiring electrical outlets for the home are done.
How to Install Home Office Electrical Wiring
Home Office Electrical Wiring
Fully Explained Photos and Wiring Diagrams for Home Office Electrical Wiring with Code Requirements for most new or remodel projects.
For more information about Electrical Wiring
Home electrical wiring projects with pictures and wiring diagrams.
This link is helpful as a Homeowner
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical Tester
This is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet Tester
This is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring.
It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire Cutter
My absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires.
This handy tool has multiple uses:
The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation.
The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets..
The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use.
|More articles about Heater and Home Electrical Wiring:|
|« Previous||Next »|
|The Watt Size Limitations of Light Fixtures||Phone Jack Wiring and 4 Wire Connections|