Power Quality and Your Home Electronic Devices
Why does my neighbor’s ac unit make my lights flicker? How Power Quality and Power Conditioners help protect Home Electrical Devices.
Power Quality Problems Can Damage Electronic Devices
[ad#block] Electrical Question: Why does my neighbor’s ac unit make my lights flicker?
A new house is being built next door. They just installed the heating and air conditioning units. When the neighbor’s ac units turn on, my lights flicker.
- The Electric Provider is telling me this is normal, but I have never had this situation in the 5 other homes I have owned over the last 20 years.
This electrical wiring question came from: Phil, a Homeowner from Wheaton, Illinois.
Thanks for your electrical wiring question Phil.
How to Have Great Electrical Power Quality
Flickering lights are not normal. This is an indication that most likely your home’s electrical power and the new home are connected to the same transformer which is now under rated and needs to be replaced with a larger one.
How Power Quality and Power Conditioners help protect Home Electrical Devices
- Call your electrical utility provider and tell them what you are experiencing and they should come out and replace the existing transformer.
- In the mean time your dealing with a Power Quality condition, so if you have sensitive electronic devices in your home I would purchase some surge protector plug strips and plug these devices in for protection.
- By the way, if you are not satisfied with the response from the electrical utility company then look up your state Public Utilities Commission, discuss the situation with them and find out what the acceptable level of power is for your area, then ask them to come out and place a monitor on your electric service.
The Following will assist you with Electrical Power Quality
Power Quality for Your Home
Home electrical power quality articles help you prevent power quality occurrences that can damage your home and appliances. Understanding the threats and installing the right power quality protection will help prevent electrical power quality problems.
Surge protectors plug into grounded wall receptacles where sensitive electronic equipment is located. These devices defend electronic components against surges from outside, and internally generated transient events (surges) that travel through AC power lines. Low-voltage surge suppressors defend electronic components against surges from outside, and internally generated transient events (surges) that travel through phone, data, and coaxial lines. These plug-in protectors generally have much lower limiting voltages than entry protectors, and provide better protection for electronic equipment.
The following may also be helpful for you:
Electrical Wiring Video #2
Home Electrical Wiring Videos about this Topic and More
Learn more with my Home Electrical Video Course:
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
|More articles about Power Quality and Home Electrical Wiring:|
|« Previous||Next »|
|How To Wire For Two Light Switches||Wiring an Electric Dryer for a 3-Wire Cord|