Planning Electrical Wiring Modifications
How to Make Changes in Electrical Wiring Configurations: Identifying Electrical Wiring for an Alternative Application.
Identifying Electrical Wiring Before Making Changes
[ad#block]Electrical Question: How do I wire a light switch and plugs?
- I have a box that contained previously a switch to operate a light in the ceiling. On one side of the box and on the other was a plug on the bottom and a switch on top that used to run a heater in the ceiling.
- The heater was disconnected years ago and I wanted to make the box just operate the light on one side and have two plugs on the other.
- The wires coming in are a single black and white on the side of the box with the plugs and a black and white set on the other side that looks like it is a continuous set of wires that was cut for this box.
How would I wire this?
This electrical question came from: Steve, from Lake Jackson, Texas.
Thanks for your electrical question Steve
How to Make Changes in Electrical Wiring Configurations
Identifying Electrical Wiring for an Alternative Application
Steve, all of the wires that you have described would have to be positively identified in order to understand how to safely make the necessary connections for your intended application.
Electrical Junction Box and Cover Plates
For electrical devices that will no longer be used it is best to remove the electrical wiring connections and place the capped off electrical wires and cable in an approved electrical junction box that will be accessible.
Electrical Wire for the Home
Complete listing of electrical wire types and parts used for home projects with electrical code information serves as selection guidelines.
Electrical Junction Boxes for Home Wiring
Understanding electrical junction boxes and what they are used for. Home electrical wiring is the process of installing electrical wire to a location that will serve electrical devices or an appliance. One very important component is the box where the wire will be installed. The type and size of the home wiring electrical boxes will depend upon the circuit size, application and its location.
The following may also be helpful for you:
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical Tester
This is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet Tester
This is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring.
It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire Cutter
My absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires.
This handy tool has multiple uses:
The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation.
The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets..
The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use.
|More articles about Electrical Wiring and Home Electrical Wiring:|
|« Previous||Next »|
|Switch Wiring for a Bath Exhaust Fan||Replace Bad Rocker Style Light Switches|