Options for Wiring Bedroom Lighting
|
How to Wire Lighting for a Bedroom and Decide Fixture Types and Light Switch Options |
How to Wire Lighting for a Bedroom
[ad#block]Electrical Question: We are purchasing a spec house (in South Carolina). The builder forgot to install wiring for an overhead light in the master bedroom, but did provide a switch for the non-existent wiring. Our home inspector “thought” it might be required by code to have wiring for an overhead light, but he wasn’t sure.
Can you help?
Thank you,
Jennifer
This electrical question came from: Jennifer, a Homeowner from Fort Mill, South Carolina.
See more about Home Wiring for South Carolina
Dave’s Reply:
Thanks for your electrical question Jennifer.
Bedroom Lighting Requirements
Planning Fixture Types and Light Switch Options
- Bedrooms should either have a wall outlet or an overhead light that is controlled by a wall switch located at the entry of the bedroom.
- If the bedroom does not have a ceiling light then an available power source may be located and extended to the desired location and wired to be controlled by the wall switch.
- Light fixtures should be selected before the electrical wiring is installed for the light and the switch or dimmer when the light fixture will not be the standard 120 volt.
RESOURCES
Wiring a Light Switch – Diagram 1
Fully Explained Light Switch Wiring Diagrams. Detailed Electrical Wiring Diagrams and Pictures assist your Home Electrical Projects.
How to Install Bedroom Electrical Wiring
Bedroom Electrical Wiring Requirements
Fully Explained Photos and Wiring Diagrams for Bedroom Electrical Wiring with Code Requirements for most new or remodel projects.
Electrical Code Articles for Home Wiring
Electrical Code Directory covering lighting-codes.
For more information about Home Wiring
Home Wiring
Home Wiring
Basic Home Wiring Diagrams with Pictures
The following may also be helpful for you:
Learn more about Home Electrical Wiring
|
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical TesterThis is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet TesterThis is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring. It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire CutterMy absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires. This handy tool has multiple uses: The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation. The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets.. The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use. |
More articles about Bedroom Lighting and Home Electrical Wiring: | |
« Previous | Next » |
Wiring a Up Down Switch for a Electric Projector Screen | Dryer Circuit Wiring and Connections |
I’m wiring a new ceiling light and I’m wondering if i need to fish down all the way to the powered outlet or can I just splice that same wire in my attic? There is no existing power for the ceiling fixture. I also know how to get the switch powered to the light.
Hi Stéphane,
Electrical Power for a Ceiling Fan
There are a variety of ways to provide power for a ceiling fan including fishing down the wall to a receptacle or switch box, and splicing with a circuit in the attic is one way as well. The point is to install the additional wiring correctly, according to code, and to have the appropriate inspections.
It should be noted that wiring in the attic should be positively identified as an appropriate source of power before making the splice.
I hope this helps,
Dave