Light Fixture Wiring and the Spare Red Wire
How to Connect the Red Wire for a Ceiling Light Fixture: The Red Wire in the Ceiling Fan or Light Fixture Wiring.
Do You Need Electrical Help?
Guide to Residential Electrical Wiring
The Red Wire in the Ceiling Fan or Light Fixture Wiring
Electrical Question: I am trying to replace a ceiling light fixture.
- The switch it is connected to is a dimmer switch with an on/off button as well as a dimmer slider.
- The wiring in the ceiling contains a black, red and white wire as well as a ground.
- The fixture contains only black and white.
- What would the red wire be for and how do I connect it?
This electrical wiring question came from: Marlene, a Homeowner from Brampton, Ontario, Canada.
Additional Comments: Great resource for help.
Thanks for your electrical wiring question Marlene.
How to Connect the Red Wire for a Ceiling Light Fixture
- The Red Wire
The red wire is most likely a spare wire that was intended to be used when wiring for a ceiling fan.
- The Wall Switch
Typically when a ceiling fan is installed the red wire is most commonly used for the light and the black is commonly for the fan motor.
- The Red Wire as a Spare Wire
When a ceiling fan is not installed, this spare red wire is insulated with electrical tape or capped off with a wire nut.
More about Wiring a Light Fixture
Light Switch Wiring
Wiring a dimmer switch
3 Way Dimmer Switch Wiring Diagram
Fully explained 3 way dimmer switch wiring diagram will take the mystery out of wiring a 3-way dimmer switch.
Electrical Wire for the Home
Complete listing of electrical wire types and parts used for home projects with electrical code information serves as selection guidelines.
You Can Avoid Costly Mistakes!
Here's How to Do It:
Wire It Right with the help of my Illustrated Wiring Book
Great for any Home Wiring Project.
Perfect for Homeowners, Students,
Handyman, Handywomen, and Electricians
Wiring GFCI Outlets
Wiring Home Electric Circuits
120 Volt and 240 Volt Outlet Circuits
Wiring Light Switches
Wiring 3-Wire and 4-Wire Electric Range
Wiring 3-Wire and 4-Wire Dryer Cord and Dryer Outlet
How to Troubleshoot and Repair Electrical Wiring
Wiring Methods for Upgrading Electrical Wiring
NEC Codes for Home Electrical Wiring
....and much more.
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
Electrical Tips to Help You Wire it Right
The Safest Way to Test Electrical Devices and Identify Electric Wires!
The Non-Contact Electrical Tester
This is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!
The Plug-In Outlet Tester
This is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring.
It detects probable improper wiring conditions in standard 110-125 VAC outlets
Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency
Lights indicate if wiring is correct and indicator light chart is included
Tests standard 3-wire outlets
Light indicates if wiring is incorrect
Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!
The Wire Stripper and Wire Cutter
My absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires.
This handy tool has multiple uses:
The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation.
The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets..
The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use.