Kitchen Stove Not Working After Kitchen Installation
How to Repair Kitchen Stove Wiring. What to do With a Possible Damaged Electrical Cable for a Kitchen Stove, testing the circuit and accessing the wiring to perform the repairs
Possible Damaged Electrical Cable for Kitchen Stove
[ad#block]Electrical Question: I recently had counter top and cabinets assembled in my kitchen.
- After installation my stove and my oven stopped working. What happened?
- No wires were disconnected or turned off by the breaker box.
- We have current but at the coils are not heating up.
This electrical wiring question came from: Gail , a Homeowner from Baltimore,Maryland
Thanks for your electrical wiring question Gail.
How to Repair Kitchen Stove Wiring
Skill Level: Advanced – a Licensed Electrical Contractor should be consulted.
Tools Required: Basic Electricians Pouch Hand Tools, Ammeter and Voltage Tester.
Estimated Time: Depends on age of the home, the condition of the electrical system and available access to electrical components.
Precaution: Electrical troubleshooting of this level is best performed by a qualified electrical contractor.
What to do With a Possible Damaged Electrical Cable for Kitchen Stove
- This is going to require some voltage tests and probes from a qualified electrician who can identify the exact problem.
- It is very possible that when the cabinets and counter tops were being installed that a long screw may have penetrated an electrical circuit cable that feeds the stove.
- If this is the case then the electrician will have to recommend the best way to make the repairs based on the access to the possible damaged area of the cable.
The Following will assist you with your Kitchen Stove Wiring
- Electrical Wiring Protection using Circuit Breakers
- Wiring Options for a Kitchen Oven
The following may also be helpful for you:
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical Tester
This is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet Tester
This is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring.
It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire Cutter
My absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires.
This handy tool has multiple uses:
The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation.
The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets..
The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use.
|More articles about Electrical Wiring, Stove and Home Electrical Wiring:|
|« Previous||Next »|
|Installing Recessed Lighting||How To Extract a Broken Light Bulb From a Socket|