Is Your Electric Clothes Dryer Shocking You?
Why am I getting shocked by my electric dryer? How to Check a Dryer Electric Circuit, Troubleshooting Dryer Electrical Wiring Connections.
Faulty Electric Dryer Connections May Cause Dangerous Shocks!
Electrical Question: Why am I getting shocked by my electric dryer?
- I have a 3 prong dryer outlet and I connected it but when I plug in the dryer it shocks me when I touch it.
This electrical wiring question came from: Michael, a Handyman from Hanford, California.
See more about Electrical Wiring for California
Additional Comments: This website is very helpful for people like me, Thank You.
Thanks for your electrical safety question Michael.
This question describes a very dangerous condition that needs to be corrected right away.
How to Check a Dryer Circuit for a Wiring Problem
Application: Testing 240 Volt Dryer Circuit.
Skill Level: Intermediate to Advanced.
Tools Required: Basic Electricians Pouch Hand Tools and Voltage Tester.
Estimated Time: Depends on personal level experience, ability to work with hand tools and electrical troubleshooting skills.
Precaution: Identify the circuit, turn it OFF and then Tag it with a Note before making inspections or wiring modifications.
Note: Electrical troubleshooting is best performed by a qualified electrical contractor
Troubleshooting Dryer Electrical Wiring Connections
- Michael, the dryer circuit should be turned off, and unplugged.
- The wiring connections will need to be checked and verified.
- From what you have described the wiring connections are incorrect and most likely two wires are reversed where one of the hot wires is sending power to the ground or the frame of the dryer.
- This is very dangerous and needs to be corrected right away.
- If you are not sure of what you are doing then please call a qualified electrician.
- Until the wiring is corrected the electrical circuit to the dryer should remain off and the dryer should be unplugged.
More about Wiring a Clothes Dryer
Electrical Wiring for a Clothes Dryer
Wiring a Dryer
- See an electric dryer installation with a typical 220 Volt electric power cord wiring system.
- You may find yourself with either a 3-wire or 4-wire electric dryer, or a 3-wire or 4-wire outlet.
- Lets look a how the electric dryer is wired and what to do if your cord does not match the plug.
For more information about 220 Volt Wiring Diagram
220 Volt Wiring Diagram
- Wiring 220 Volt Electrical Outlet
- Home electrical wiring includes 110 volt outlets and 220 volt outlets and receptacles which are common place in every home.
- See how electrical outlets for the home are wired.
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical Tester
This is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet Tester
This is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring.
It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire Cutter
My absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires.
This handy tool has multiple uses:
The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation.
The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets..
The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use.
|More articles about Electrical Shocks From Dryer and Home Electrical Wiring:|
|« Previous||Next »|
|Heat Pump Problems and Electrical Power||Is Your Electrical Wiring the Right Type|