Installing a Manual Transfer Switch
How to Select the Right Generator Transfer Switch: How to Save Money on a Generator Transfer Switch – These two items actually work hand in hand, and the end result will actually be how large the generator will be and there are a few more options that may be much easier to install and much less costly that a large transfer switch.
Home Generator Transfer Switch
Electrical Question: We want to install a manual transfer switch for a 6500 watt 30 amp portable generator 30amp.
- While an electrician will do work to be safe, we would like to know what is required.
- Issue is the house has two (2) electrical panels > main enters into a 125 amp panel, then feeds across house to another 40amp panel.
- Can we use a 100 amp or require a 200 amp transfer switch?
This Home Generator Electrical Question came from: Ted, from Kensington, Connecticut.
Thanks for your Electrical Wiring Question Ted.
Installing a Generator Transfer Switch
Application: Generator Transfer Switch.
Skill Level: Advanced – Best installed by a Licensed Electrical Contractor.
Tools Required: Electricians pouch of hand tools and the various power tools necessary for installing the generator and transfer switch.
Estimated Time: Depends on the type and size of the generator and transfer switch and the available access to the project area.
Precaution: Any existing electrical wiring within the immediate area that may interfere with the installation of the transfer switch may need to be relocated if necessary. The selection of the transfer switch or generator connection or generator circuit panel will affect the over all project.
Important: Installing a generator, transfer switch or generator panel must be well thought out and performed with a permit with all work being inspected.
Electrical Code Compliance: Generators and transfer switches should only be installed with a permit and inspected. A generator project is best installed by a Licensed Electrical Contractor.
How to Select the Right Generator Transfer Switch
The process of choosing the type and size generator transfer switch depends on two things:
- What size the generator will be, specifically the volts and amperage rating and capability.
- The actual load that will be placed on the generator.
These two items actually work hand in hand, and the end result will actually be how large the generator will be. Once the size of the generator is known then the type of transfer switch may be selected, and if the size of the generator is not that large then there are a few more options that may be much easier to install and much less costly that a large transfer switch.
Factoring in the Size of the Electrical Service or Panel
If a manual transfer switch will be installed then the size of the transfer switch must be rated as the same size as the electrical service that will be brought into and switched by the transfer switch, regardless of the size of the generator. So, if the generator power will be providing power for a 240 volt 125 amp panel then the transfer switch must be rated for at least 240 volts 125 amps.
Generator Transfer Switch Options
How to Save Money on a Generator Transfer Switch
- When a generator is rated at 240 volts and 60 amps or less then a UL Approved Circuit Breaker Interlock Kit may be installed if one is available and compatible with the electrical panel.
- The point is this, there is no reason to install a large transfer switch if the generator will not produce a large amount of power and there are options for installing one of these other interlock systems or a smaller generator circuit panel.
- However, if you are planning to have the whole house on full power and a larger generator will be installed then yes, you will need a large transfer switch that is rated the same as the home electrical service panel.
More about Generators and Transfer Switches
Home Electric Generators
This series covers a wide variety of topics all about home generators including sizing, selecting, connecting and safely operating this all important addition to your home.
The Importance of a Generator Transfer Switch
Generator Questions and Answers
House Wiring Circuits and Circuit Breakers
This article looks at common 120 volt and 240 volt house wiring circuits and the circuit breakers that are installed identifying the types and amperage sizes used in most homes.
Electrical Panel Circuit Listing
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical Tester
This is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet Tester
This is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring.
It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire Cutter
My absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires.
This handy tool has multiple uses:
The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation.
The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets..
The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use.
|More articles about Electrical Wiring, Generators, Transfer Switch and Home Electrical Wiring:|
|« Previous||Next »|
|How to Test and Repair a Smoke Detector Circuit||Identifying Travel Trailer Outlet Problems|