Install Air Tight Recessed Lighting for Efficiency
|
I removed the burned out spot light bulb in the recessed light fixture and I noticed a draft coming down from the attic, is there some sort of gasket that’s available to place around the neck of the new bulb… |
Air Tight Recessed Lights for Efficiency
[ad#block]Question: When I removed the burned out spot light bulb in the recessed light fixture in the ceiling of my kitchen, I noticed a cold draft coming down from the attic out of the gap between the empty socket and the fixture housing. Is there some sort of gasket that’s available to place around the neck of the new bulb when I screw it back into the socket in order to seal that gap up and stop the draft?
Thanks, Dave
This electrical question came from: Dave, a Homeowner from Huntington Beach, Ca. 92649, California.
See more about Home Wiring for California
Additional Comments: Great.
Dave’s Reply:
Thanks for your electrical question Dave.
Air Tight Recessed Light for Efficiency
Dave, you may want to try the gaskets that are used with outdoor flood lights. These are flat round gaskets that are placed around the neck or base of the lamp before screwing in the lamp. You may want to inspect the housing of your recessed light to make sure it is not damaged. Many recessed lights appear to be sealed up, however only the newer can lights that specify that they are Air Tight enclosures are truly air tight and prevent airflow between the home and the attic area.
The Following links will assist you with your electrical question:
recessed lighting
How To Install Recessed Lighting
This article is about recessed lighting for your home electrical improvements. Discover how recessed lighting can enhance the mood of any room in your home.
How to Install Kitchen Electrical Wiring
Kitchen Electrical Wiring
Fully Explained Photos and Wiring Diagrams for Kitchen Electrical Wiring with Code Requirements for most new or remodel projects.
This link is helpful as a Homeowner
Do-It-Yourself Electrical
The following may also be helpful for you:
Learn more about Home Electrical Wiring
|
||||||||
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical TesterThis is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet TesterThis is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring. It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire CutterMy absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires. This handy tool has multiple uses: The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation. The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets.. The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use. |
||
| More articles about Air Tight Can Light and Home Electrical Wiring: | |
| « Previous | Next » |
| Basement Circuits and Electrical Wiring | Concrete Floors and Electrical Safety |
