How to Update Basement Electrical Wiring
Brent in Michigan asks; I am Updating a Basement Electric Panel and Circuit Wiring: How to update the wiring in a home where the main panel is in the basement with a couple of fuse boxes and replacing this with a circuit breaker box.
Basement Electrical Wiring
[ad#block]Electrical Question: I am updating the electrical wiring in my basement and changing from the fuse boxes to a circuit breaker panel.
- Main Electrical Power
The home main panel is in the basement with a couple of fuse boxes. I am replacing this with a circuit breaker box. The power on the outside of the house comes down the mast into the meter, coming out of the meter box instead of the normal one wire running to the breaker box there is two wires coming out and running to the same spot on the fuse box.
- Fuse Box Circuit
Why is their two separate wires coming out of the meter box and going to the same spot on the fuse box, instead of one?
This electrical wiring question came from: Brent from Michigan.
Thanks for your electrical wiring question Brent.
Updating Basement Electrical Wiring
Application: Electrical Wiring for a Basement.
Skill Level: Intermediate to Advanced – Best installed by a Licensed Electrical Contractor or Certified Electrician.
Tools Required: Electricians Pouch of Hand Tools for Rough-In Wiring, Electric Drill and Auger Bits, Extension Cords, and a Ladder as needed.
Estimated Time: Depends on the extent of the basement wiring project and available access to the project area.
Precaution: Any existing wiring in the immediate area that may interfere with the new wiring should be identified, turned OFF and Tagged.
Notice: Installing additional electrical wiring in the basement should always be done according to local and national electrical codes with a permit and be inspected.
Updating a Basement Electric Panel and Circuit Wiring
Note: Updating Electrical Wiring is essential for most older homes to make them safer and more reliable.
Brent, you may be referring to what is known as a parallel feed, where there are more than one cable that supplies power to the same bus or phase of power. This is sometimes used to supply power to a main breaker where two cables will be easier to terminate than one larger cable. Consider the following information which may apply to your home improvement project.
- Upgrading the Electrical System
Improving Home Electrical Wiring is essential for most older homes to make them safe, and it should always begin with an evaluation of the existing electrical service.
- Electric Panel Upgrade
The electrical distribution system, which includes the fuse box or the circuit breaker box may be attached to the main electrical service or it may be a separate panel at a different location.
- Parts and Materials
The age of the home electrical system and the methods and materials used should be carefully inspected and evaluated by a professional licensed electrical contractor.
- Planning the Electrical Upgrade
Plans for adding new basement electrical circuits or updating electrical wiring may then be considered to bring the home electrical system up to current codes which will ensure a higher level of safety for the home and it’s occupants.
More about Basement Electrical Wiring
Fully Explained Photos and Wiring Diagrams for Basement Electrical Wiring with Code Requirements for most new or remodel projects.
Electrical Codes for Basement Wiring
Electrical Code Directory covering AFCI circuit, electrical-boxes, electrical-circuit, electrical-code-outlets, electrical GFCI, electrical-grounding, electrical-project, electrical-services, electrical-underground, electrical-wiring, electrical-wiring-code, lighting-code, and smoke-detectors.
Electrical Circuit Breakers
Circuit Breaker and Panels
A guide to home electrical circuit breakers and how they work to protect your electrical wiring. When properly installed, your home electrical wiring is protected by a circuit protection device.
Electrical Wire for the Home
Complete listing of electrical wire types and parts used for home projects with electrical code information serves as selection guidelines.
Understanding Digital Volt Meters
When working on home electrical wiring using voltage meter can play an important part in electrical safety. Electrical testers and voltage meters enable you to identify electrical circuits and help prevent the possibility of accidental electrical shock.
Types of Electrical Testers
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical Tester
This is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet Tester
This is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring.
It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire Cutter
My absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires.
This handy tool has multiple uses:
The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation.
The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets..
The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use.
|More articles about Basement Wiring, Electrical and Home Electrical Wiring:|
|« Previous||Next »|
|How to Install Home Electrical Wiring||Electrical Power Design for a Garage Workshop|