How To Install a Wall Sconce Light Fixture
|
Considerations to Help you Plan Your Wall Sconce Wiring Project: I am installing a wall sconce but the width between the wall stud… |
Considerations for Electrical Junction Boxes
[ad#block]Electrical Question: I am installing a wall sconce but the width between the wall stud and water pipe is only 1 3/4 inch. The Junction boxes seem to all come in 2 inch width. What can I use to hold up the fixture?
Thanks
This electrical question came from: Dennis, a Homeowner from Glenview, IL.
Dave’s Reply:
Thanks for your electrical WIRING question Dennis.
Considerations to Help you Plan Your Wall Sconce Wiring Project
- Dennis, you could try using a normal 1-gang or single gang electrical box as long as the light fixture canopy or base is large enough to cover the box, and I thing you will find that it will.
- The light fixture bracket can be installed normally to support the light fixture.
- If space is really tight then you could install a face-nail 1-gang box and nail the box from the from of the stud.
- Electrical Junction Boxes for Home Wiring
- Understanding electrical junction boxes and what they are used for.
- Home electrical wiring is the process of installing electrical wire to a location that will serve electrical devices or an appliance.
- One very important component is the box where the wire will be installed.
- The type and size of the home wiring electrical boxes will depend upon the circuit size, application and its location.
- Kitchen Electrical Wiring Requirements
- This wiring diagram and pictures explain the basic kitchen electrical code wiring requirements required for most new or remodel projects.
The following may also be helpful for you:
|
||||||||
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical TesterThis is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet TesterThis is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring. It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire CutterMy absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires. This handy tool has multiple uses: The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation. The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets.. The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use. |
||
| More articles about Single Gang Box and Home Electrical Wiring: | |
| « Previous | Next » |
| I turned off the main breaker to the house to show the kids how it worked,… | I am replacing a ceiling fixture the holes for mounting the bracket are stripped |
