How To Install A 3-Way Motion Sensor Switch
How can I install a single pole motion sensor switch in place of an existing three-way switch? Wiring a 3 Way Motion Switch.
3 Way Motion Switch
Electrical Question: How can I install a single pole motion sensor switch in place of an existing three-way switch.
This electrical question came from Ken, a Homeowner from Grand Junction, Colorado.
Thanks for your electrical question Ken.
Installing a 3Way Occupancy Sensor
This is best accomplished by installing a 3-way Occupancy Sensor Switch.
I have located the switch listed below that should work for your application:
- Leviton PR180-1LW – (The W designates the color)
- The switch should be available at your local hardware store.
- This switch should be installed in the main occupied or traffic location.
- As per the instructions, adjust the Duration of Time to remain On and Field of Vision and your set.
For more information about Wiring a 3 Way Motion Switch
This link is helpful as a Homeowner
Make sure not to miss these Resources for: How-To-Videos
For Best Results Consult a Licensed Electrical Contractor.
Locate An Electrical Contractor in Your Area
|« Electric Stove Hot Plates Not Heating||GFCI Circuit Breaker and Wiring »|
Browse other questions in the following categories:
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.