How To Install A 3-Way Motion Sensor Switch
How can I install a single pole motion sensor switch in place of an existing three-way switch? Wiring a 3 Way Motion Switch.
3 Way Motion Switch
Electrical Question: How can I install a single pole motion sensor switch in place of an existing three-way switch.
This electrical question came from Ken, a Homeowner from Grand Junction, Colorado.
Thanks for your electrical question Ken.
Installing a 3Way Occupancy Sensor
This is best accomplished by installing a 3-way Occupancy Sensor Switch.
- The switch should be available at your local hardware store.
- This switch should be installed in the main occupied or traffic location.
- As per the instructions, adjust the Duration of Time to remain On and Field of Vision and your set.
For more information about Wiring a 3 Way Motion Switch
This link is helpful as a Homeowner
Make sure not to miss these Resources for: How-To-Videos
For Best Results Consult a Licensed Electrical Contractor.
Locate An Electrical Contractor in Your Area
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical Tester
This is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet Tester
This is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring.
It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire Cutter
My absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires.
This handy tool has multiple uses:
The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation.
The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets..
The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use.
|More articles about 3-Way Switch, Occupancy Sensor, Wiring Diagrams and Home Electrical Wiring:|
|« Previous||Next »|
|Electric Stove Hot Plates Not Heating||GFCI Circuit Breaker and Wiring|