How To Fix An Electrical Panel Feed
I just bought a condo they was built in 1994. It turns out my neighbors air conditioner is powered by my ac circuit breaker…
Electrical Question from James about a Swapped A/C Circuit
Background: James, a Homeowner from basking ridge NJ
[ad#block]Question: I just bought a condo they was built in 1994. It turns out my neighbors air conditioner is powered by my ac circuit breaker,will this an expensive fix. I’m assuming theirs powers mine although I’m not sure yet I believe this was a mistake by the builders and not a theft situation. I’m trying to figure out if they association will pay to fix this. Any thoughts on this odd situation – have you ever heard of this before?
Thanks for your electrical question James. No – I have never heard of this before, but can see that it is possible. My guess is that theses two condo units are positioned side by side and that the floor plan is basically mirrored or flipped. And very likely both of your electrical panels are installed in a common wall between the two units, really close to each other. If this is true then what may have happened is that the a/c cables were installed to the wrong panels. Yes,Â this can be fixed but one side of the wall will need to be opened up so the cables can be removed and re-routed correctly.Â I would contact the company who sold the unit to you and request they fix this. If they would like to located the original electrical contractor and take proceedings that up to them and the legal departments.
The Following links will assist you with your electrical question:
For more information about Other Electrical Issue
Home Electrical Wiring
This link is helpful as a Homeowner
Make sure not to miss these Resources for: How-To-Videos
Be Careful and Be Safe – Never Work on Energized Circuits!
For Best Results Consult a Licensed Electrical Contractor.
Locate An Electrical Contractor in Your Area
The following may also be helpful for you:
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical Tester
This is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet Tester
This is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring.
It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire Cutter
My absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires.
This handy tool has multiple uses:
The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation.
The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets..
The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use.
|More articles about Electrical, Wiring Electrical and Home Electrical Wiring:|
|« Previous||Next »|
|How to Make an Electrical Wire Splice Connection||Identifying The Cause of Dimming Lights|