How to Convert a Switched Outlet to Non-Switched
How to Convert Switched Outlets to be Hot All the Time: The easiest way to convert a half-hot duplex receptacle or a switched outlet to be hot all the time is really not that difficult.
Converting to a Non-Switched Outlet
Electrical Question: We are thinking of buying a house that has no ceiling fans in the bedrooms.
- There is a switch already in the rooms that controls the outlets on the walls.
- I know how to install the fan and wiring but how would I go about making the outlets hot all the time instead of them being connected to the switch?
This electrical wiring question came from: JC, a Homeowner from Colorado Springs, Colorado.
Application: Rewiring for a Half Hot Switched Outlet.
Skill Level: Intermediate to Advanced – Best Installed by a Electrical Contractor or Certified Electrician.
Tools Required: Specific to the scope of the work and the condition of the home and project. Electricians Tools, including Pouch of Hand Tools, Power Tools, Drill motor and Auger Drill Bits and Extension Cords, and a Voltage Tester.
Estimated Time: Depends on personal level experience, ability to work with tools and install electrical wiring.
Precaution: Identify the circuit power source at the panel, turn it OFF and Tag it with a Note before installing wiring or working or making connections.
Notice: Installing additional outlet wiring should be done through the local building authority, according to applicable local and national electrical codes, with a permit, and have required inspections.
Thanks for your electrical wiring question JC.
Converting a Switched Outlets to be Hot All the Time
Rewiring a Switched Outlet to be Hot All The Time
- The easiest way to convert a half-hot duplex receptacle or a switched outlet to be hot all the time is really not that difficult.
- The wall switch simply has a loop of the hot wire going through it, so if the switch was removed and the wires were connected together then the wall outlet would be hot all the time.
- The switch could be left as a dummy.
More about Wiring Outlets
Wiring Electrical Outlets for the Home
Home electrical wiring includes 110 volt outlets and 220 volt outlets and receptacles which are common place in every home. See how wiring electrical outlets for the home are done.
Wiring a Light Switch – Diagram 1
Fully Explained Light Switch Wiring Diagrams. Detailed Electrical Wiring Diagrams and Pictures assist your Home Electrical Projects.
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical Tester
This is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet Tester
This is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring.
It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire Cutter
My absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires.
This handy tool has multiple uses:
The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation.
The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets..
The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use.
|More articles about Switched Outlet and Home Electrical Wiring:|
|« Previous||Next »|
|Replacing Outlets Without Ground Wires||How to Repair a Circuit that Stopped Working|