How do I wire power to more than one light switch?
The power must be fed separately to each switch that you would like to operate independently…
Electrical Question from Ellis about Circuit Wiring
Question: When there are lights only and no receptacles on a circuit how can light switches stay hot. Currently I have all the lights being controlled by the first switch on the circuit. Once I switch it off there is no power to the other switches. The source came from the panel box to the switch then to the light then I connected 14/2 from the light to the next switch for power. Each time I switch the power off from this switch the entire circuit has no power. Please explain What I need to do to get power to the remaining circuit
Additional Comments: Excellent Resource for DIY
Thanks for your electrical question.
Hi Ellis – The power must be fed separately to each switch that you would like to operate independently.
The Following links will assist you with your electrical question:
For more information about Circuit Wiring
This link is helpful as a Homeowner
Make sure not to miss these Resources for: More about Switches
Be Careful and Be Safe – Never Work on Energized Circuits!
For Best Results Consult a Licensed Electrical Contractor.
Locate An Electrical Contractor in Your Area
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
|More articles about Electrical, Light Switch and Home Electrical Wiring:|
|« Previous||Next »|
|Can I splice behind drywall with or without an electrical box?||What gauge or type wire for sink disposal to wall socket?|