How to Wire a Remote Control Ceiling Fan
How to Wire a Remote Control and Wall Switches for a Ceiling Fan: A remote control and wall switches may be wired and used to control a ceiling fan so it will allow you to use the remote control for the light only but you will need to control the fan motor.
Remote Control Ceiling Fan
Electrical Question: We just bought a new Remote Controlled Hampton Bay Ceiling fan for a bedroom we just had rewired.
- We wired it so we had two separate switches. One for the light and one for the fan.
- We bought this fan knowing it had a remote control, but it says it’s only allowed one switch.
- We want to know can we have the two switches, one for the light, and one for the fan, and still use the remote control also.
Additional Comments: Loved it!!
Background: Jacon, a Homeowner from Columbus Ohio
Thanks for your electrical wiring question Jacon.
How to Wire a Remote Control and Wall Switches for a Ceiling Fan
Skill Level: Beginner to Intermediate. This electrical repair project is best performed by a Licensed Electrical Contractor or Certified Electrician.
Tools Required: Basic Electricians Pouch Hand Tools, a non-aluminum ladder and Voltage Tester.
Estimated Time: Depends on personal level experience, ability to work with tools and access to the ceiling fan.
Precaution: Identify the ceiling fan circuit, turn it OFF and Tag it with a Note before working with the wiring.
A remote control and wall switches may be wired and used to control a ceiling fan so it will allow you to use the remote control for the light only but you will need to control the fan motor, Here’s How:
- Check to see if the remote control is limited to the lighting only, I believe this will be the case.
- This being the case then connect the black wire for the fan motor to the black wire from the light switch.
- The remote control can be wired to the red wire from the wall switch and used for the blue light fixture wire, then share the white neutral.
- This will allow you to use the remote control for the light only but you will need to control the fan motor from the wall switch.
- The pull chain on the Ceiling fan will need to be in the appropriate position for the on/off and desired speed selection for the fan motor.
- Understand that the wall switches are the main source of power and they need to be on for the light remote to work.
- Then if the light has a pull chain, it too needs to be in the appropriate position as well.
- Typically the light pull chain switch should be in the full on position in order to allow full range control from the remote control.
- When using a remote control as described above you will now have the following methods of control that you must keep track of , otherwise one may prevent the other from functioning:
- The wall switch – the power source and primary control.
- The remote control – the secondary control.
- The pull chain switches – the third control.
- If any one of these control sources is OFF then it will prevent the fan motor or the light fixture from turning ON.
More about Ceiling Fans
Installing Ceiling Fans and Remote Controls
Take the mystery out of ceiling fan wiring.
Ceiling Fans are a great way to lower your energy bill and brighten up one of your favorite rooms.
How to Install Ceiling Fans and Wiring
For Best Results Consult a Licensed Electrical Contractor.
Locate An Electrical Contractor in Your Area
The following may also be helpful for you:
Learn more about Home Electrical Wiring
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical Tester
This is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet Tester
This is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring.
It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire Cutter
My absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires.
This handy tool has multiple uses:
The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation.
The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets..
The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use.
|More articles about Ceiling Fan Questions, Electrical, Hampton Bay Remote and Home Electrical Wiring:|
|« Previous||Next »|
|Electrical Circuit Requirements for a Dream House||How to Install Electrical Wiring for a Kitchen Hot Water Dispenser|