How do I connect two fluorescent light fixtures together?
|
Depending on the containment of the fixtures, how far the fixtures will be apart and if the wiring will be vulnerable to damage you could either use… |
Electrical Question from Sam about wiring fixtures
[ad#block]Question: How do I connect 2 fluorescent light fixtures together in a light table?
Additional Comments: Great Site. Thanks.
Dave’s Reply:
Thanks for your electrical question Sam. Depending on the containment of the fixtures, how far the fixtures will be apart and if the wiring will be vulnerable to damage you could either use 3-wire lamp cord and the appropriate cord connectors or you could protect the wiring by installing a flexible conduit and conduit fittings. The wire size should be no less than 14 gauge. A cord could be added to one of the fixtures which would have a 3-wire male cord cap for plugging into the wall. If the light table is in a commercial style work area where there is surface conduit installed then flexible conduit should connect to a junction box where a switch could be installed. Alternatively, a switch box could be added to the light table and mounted in a convenient location. Be sure to secure the fixtures and protect the lamps. Bond the ground wire to the fixture enclosures and use snug fitting wire connectors for your splices.
The Following links will assist you with your electrical question:
For more information about 220 Volt Wiring Diagram
220 Volt Wiring Diagram
This link is helpful as a Handyman
Do-It-Yourself Electrical
Make sure not to miss these Resources for: Wiring Diagrams
Wiring Diagrams
Be Careful and Be Safe – Never Work on Energized Circuits!
For Best Results Consult a Licensed Electrical Contractor.
Locate An Electrical Contractor in Your Area
The following may also be helpful for you:
|
||||||||
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical TesterThis is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet TesterThis is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring. It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire CutterMy absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires. This handy tool has multiple uses: The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation. The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets.. The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use. |
||
| More articles about Electrical, Wiring Questions and Home Electrical Wiring: | |
| « Previous | Next » |
| What to do with the red wire from the ceiling fan remote unit | I have a constant hum through all our audio speakers |
I have two florescent fixtures , replaced ballast in one now the other light does not work
Hey Rick,
Check your wiring connections. You may have a connection where a wire has slipped out of position. Also, make sure the lamps are in the sockets all the way and that both pins are in each socket.
Hope this Brightens Up You Day!
Dave