Hot Light Fixtures Can Lead To A Fire
|
How to Make Sure a Light Bulb is Safe for Your Light Fixture |
Light Fixture Safety Labels Can Prevent House Fires
[ad#block]Electrical Question: I installed a small accent flood light connecting it to a dropped ceiling recessed light. The new light fixture’s housing gets fairly hot when in use. I double checked all the wiring and it looks OK. Any suggestions?
Background: Jess, a Homeowner from Cincinnati Ohio
Dave’s Reply:
Thanks for your electrical question Jess.
How to Make Sure a Light Bulb is Safe for Your Light Fixture
Each year thousands of homes go up in smoke, and many of them could have been prevented if basic safety labels were taken seriously.
- Jess, it sounds like you may be using a lamp that may be too high in watt output and causing the fixture housing to overheat.
- Check the installation instructions or the box that the fixture came in, it should say what size light bulb is safe for this light fixture.
- The socket of the fixture should also have a label that gives the specific size bulb that is safe to use.
- An over heated light fixture can be dangerous and could lead to a fire and also could also cause the internal wire insulation to crack and deteriorate which could create a hazardous condition too.
IMPORTANT
If you don’t take your labels seriously, then at least make sure smoke detectors are installed and working.
RESOURCES
Lighting For The Home
Lighting Electrical Codes
wiring smoke detectors
How to Install Smoke Detectors
Take the mystery out of smoke detector wiring. Smoke alarms provide the earliest warning of both fire and smoke.
recessed lighting
How To Install Recessed Lighting
This article is about recessed lighting for your home electrical improvements. Discover how recessed lighting can enhance the mood of any room in your home.
The following may also be helpful for you:
Learn more about Home Electrical Wiring
|
||||||||
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical TesterThis is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet TesterThis is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring. It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire CutterMy absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires. This handy tool has multiple uses: The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation. The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets.. The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use. |
||
| More articles about Fixtures, Lighting and Home Electrical Wiring: | |
| « Previous | Next » |
| Electrical Circuit and Dryer Wiring | CL and NCL Panels and Circuit Breakers |
