Half Hot Switched Outlets Explained
How to Wire Half Hot Switched Outlets: The brass tab is a link between the top and bottom receptacles that allow them to be isolated from one another for applications such as a wall outlet that has one receptacle controlled by the wall switch while the other receptacle is hot all the time.
The Purpose of the Brass Tab or Link on an Outlet
Electrical Question What is the purpose of the of brass tab on an electrical outlet.
This electrical wiring question came from: Bart, a Homeowner from Elliot Lake , ON
Additional Comments: So far I’ve been impressed
Thanks for your electrical wiring question Bart.
How to Wire Half Hot Switched Outlets
Skill Level: Beginner to Intermediate.
Tools Required: Basic Electricians Pouch Hand Tools and a Voltage Tester.
Estimated Time: Depends on personal level experience, ability to work with tools and the number of outlets that will be replaced.
Precaution: Identify the outlet circuit, turn it OFF and Tag it with a Note before working with the wiring.
- The brass tab is a link between the top and bottom receptacles that allow them to be isolated from one another for applications such as a wall outlet that has one receptacle controlled by the wall switch while the other receptacle is hot all the time. This method is also known as a half-hot or switched outlet.
The Following will assist you with Switched Outlets
- Wiring Electrical Outlet for the Home
- Home electrical wiring includes 110 volt outlets and 220 volt outlets and receptacles which are common place in every home. See how wiring electrical outlets for the home are done.
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical Tester
This is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet Tester
This is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring.
It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire Cutter
My absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires.
This handy tool has multiple uses:
The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation.
The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets..
The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use.
|More articles about Electrical Wiring, Outlets, Switched Outlet and Home Electrical Wiring:|
|« Previous||Next »|
|How To Wire Light Switches with Diagrams||Split-Buss Electrical Panels|