GFCI Protection For Dock Wiring
I am replacing an outlet on my dock with a GFCI outlet…
Electrical Question from Linda about GFCI Wiring for a Dock
Background: Linda, a Homeowner from Brevard, NC
[ad#block]Question: I am replacing an outlet on my dock with a GFCI outlet (the old one was NOT a GFIC outlet). It is wired to be “hot” all the time (14 gauge solid wire – black is hot, white is neutral and there is a bare wire for the ground). I also would like to install a switch that would control 2 light fixtures on the dock using power from the outlet. Can you advise how the wire should be connected from the outlet to the switch and then from the switch to the fixtures?
Thanks for your electrical question Linda.
GFCI protection can be provided for the light fixtures by wiring the lighting to the Load side of the GFCI outlet. When providing power to a dock area it would be best to install the GFCI protection at the source of power before it gets to the dock location.
The Following links will assist you with your electrical question:
For more information about GFCI Wiring
GFCI Outlet Wiring
This link is helpful as a Homeowner
Make sure not to miss these Resources for: How-To-Pictures
Home Electrical Projects
Be Careful and Be Safe – Never Work on Energized Circuits!
For Best Results Consult a Licensed Electrical Contractor.
Locate An Electrical Contractor in Your Area
The following may also be helpful for you:
Learn more about Home Electrical Wiring
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical Tester
This is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet Tester
This is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring.
It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire Cutter
My absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires.
This handy tool has multiple uses:
The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation.
The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets..
The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use.
|More articles about GFI-GFCI and Home Electrical Wiring:|
|« Previous||Next »|
|Installing Smoke Detector Electrical Wiring||Attic Ventilation Fan Wiring|